Publications 2012

Sort by Filter	Published
1 2 3 4 5 6 7 8 9 Next
Model for Environmental Assessment of Container Ship Transport Kristensen, Hans Otto Holmegaard in journal: Society of Naval Architects and Marine Engineers. Transactions (ISSN: 0081-1661), vol: 118, pages: 122-139, 2012 Type: Conference article - Conference article Presented at: SNAME Annual Meeting, Seattle, WA	2012
Experimental investigation of new manufacturing process chains to create micro-metal structures on polymer substrates for lab-on-chip sensors Calaon, Matteo ; Islam, Aminul ; Hansen, Hans Nørgaard ; Ravn, Christian in journal: International Journal of Advanced Manufacturing Technology (ISSN: 0268-3768) (DOI: http://dx.doi.org/10.1007/s00170-011-3468-2), vol: 59, issue: 1-4, pages: 101-109, 2012 Type: Journal article - Journal article DOI: 10.1007/s00170-011-3468-2	2012
Blade element momentum modeling of inflow with shear in comparison with advanced model results Aagaard Madsen, Helge ; Riziotis, V. ; Zahle, Frederik ; Hansen, Martin Otto Laver ; Snel, H. ; Grasso, F. ; Larsen, Torben J. ; Politis, E. ; Rasmussen, Flemming in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.493), vol: 15, issue: 1, pages: 63-81, 2012 Type: Journal article - Journal article DOI: 10.1002/we.493	2012
Analysis of nucleation modelling in ductile cast iron Moumeni, Elham ; Tutum, Cem Celal ; Tiedje, Niels Skat ; Hattel, Jesper Henri part of: 13rd International conference on advances in solidification process, 2011, Type: Article in proceedings - Article in proceedings Presented at: ICASP3, Aachen DOI: 10.1088/1757-899X/27/1/012062	2012
Estimating the workpiece-backingplate heat transfer coefficient in friction stirwelding Larsen, Anders ; Stolpe, Mathias ; Hattel, Jesper Henri in journal: Engineering Computations (ISSN: 0264-4401) (DOI: http://dx.doi.org/10.1108/02644401211190573), vol: 29, issue: 1, pages: 65-82, 2012 Type: Journal article - Journal article DOI: 10.1108/02644401211190573	2012
On cavitation instabilities with interacting voids Tvergaard, Viggo in journal: European Journal of Mechanics A - Solids (ISSN: 0997-7538) (DOI: http://dx.doi.org/10.1016/j.euromechsol.2011.09.011), vol: 32, pages: 52-58, 2012 Type: Journal article - Journal article DOI: 10.1016/j.euromechsol.2011.09.011	2012
Rate sensitivity of mixed mode interface toughness of dissimilar metallic materials: Studied at steady state Nielsen, Kim Lau ; Niordson, Christian Frithiof in journal: International Journal of Solids and Structures (ISSN: 0020-7683) (DOI: http://dx.doi.org/10.1016/j.ijsolstr.2011.11.001), vol: 49, issue: 3-4, pages: 576-583, 2012 Type: Journal article - Journal article DOI: 10.1016/j.ijsolstr.2011.11.001	2012
Sea state estimation from an advancing ship – A comparative study using sea trial data Nielsen, Ulrik Dam ; Stredulinsky, David C. in journal: Applied Ocean Research (ISSN: 0141-1187) (DOI: http://dx.doi.org/10.1016/j.apor.2011.11.001), vol: 34, pages: 33-44, 2012 Type: Journal article - Journal article DOI: 10.1016/j.apor.2011.11.001	2012
Coastline undulations on the West Coast of Denmark: Offshore extent, relation to breaker bars and transported sediment volume Kærgaard, Kasper Hauberg ; Fredsøe, Jørgen ; Knudsen, Søren B. in journal: Coastal Engineering (ISSN: 0378-3839) (DOI: http://dx.doi.org/10.1016/j.coastaleng.2011.09.002), vol: 60, pages: 109-122, 2012 Type: Journal article - Journal article DOI: 10.1016/j.coastaleng.2011.09.002	2012
Atomic resolution imaging of precipitate transformation from cubic TaN to tetragonal CrTaN Danielsen, Hilmar Kjartansson ; Hald, John ; Somers, Marcel A. J. in journal: Scripta Materialia (ISSN: 1359-6462) (DOI: http://dx.doi.org/10.1016/j.scriptamat.2011.11.005), vol: 66, issue: 5, pages: 261-264, 2012 Type: Journal article - Journal article DOI: 10.1016/j.scriptamat.2011.11.005	2012
Evolution strategies and multi-objective optimization of permanent magnet motor Andersen, Søren Bøgh ; Santos, Ilmar in journal: Applied Soft Computing (ISSN: 1568-4946) (DOI: http://dx.doi.org/10.1016/j.asoc.2011.10.013), vol: 12, issue: 2, pages: 778-792, 2012 Type: Journal article - Journal article DOI: 10.1016/j.asoc.2011.10.013	2012
A comparative study of two fast nonlinear free-surface water wave models Ducrozet, Guillaume ; Bingham, Harry B. ; Engsig-Karup, Allan Peter ; Bonnefoy, Félicien ; Ferrant, Pierre in journal: International Journal for Numerical Methods in Fluids (ISSN: 0271-2091) (DOI: http://dx.doi.org/10.1002/fld.2672), vol: 69, pages: 1818-1834, 2012 Type: Journal article - Journal article DOI: 10.1002/fld.2672	2012
Microstructure characterization of Friction Stir Spot Welded TRIP steel Lomholt, Trine Nybo ; Adachi, Yoshitaka ; Peterson, Jeremy ; Steel, Russell ; Pantleon, Karen ; Somers, Marcel A. J. in journal: Advanced Materials Research (ISSN: 1022-6680) (DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.409.275), vol: 409, issue: 275-280, pages: 275-280, 2012 Type: Conference article - Conference article Presented at: 7th International Conference on Processing and Manufacturing of Advanced Materials : THERMEC 2011 Supplement, Quebec City, QC DOI: 10.4028/www.scientific.net/AMR.409.275	2012
The effect of post-welding conditions in friction stir welds: From weld simulation to Ductile Failure Hattel, Jesper Henri ; Nielsen, Kim Lau ; Tutum, Cem Celal in journal: European Journal of Mechanics A - Solids (ISSN: 0997-7538) (DOI: http://dx.doi.org/10.1016/j.euromechsol.2011.10.004), vol: 33, pages: 67-74, 2012 Type: Journal article - Journal article DOI: 10.1016/j.euromechsol.2011.10.004	2012
Characterization and analysis of micro channels and sub-micron surface roughness of injection moulded microfluidic systems using optical metrology Tosello, Guido ; Marinello, Francesco ; Hansen, Hans Nørgaard in journal: Plastics, Rubber & Composites (ISSN: 1465-8011) (DOI: http://dx.doi.org/10.1179/0743289811Y.0000000017), vol: 41, issue: 1, pages: 29-39, 2012 Type: Journal article - Journal article DOI: 10.1179/0743289811Y.0000000017	2012
Mechanism of spontaneous hole formation in thin polymeric films Yu, Kaijia ; Rasmussen, Henrik K. ; Román Marín, José Manuel ; Hassager, Ole in journal: Physical Review B (Condensed Matter and Materials Physics) (ISSN: 1098-0121) (DOI: http://dx.doi.org/10.1103/PhysRevB.85.024201), vol: 85, pages: 024201, 2012 Type: Journal article - Journal article DOI: 10.1103/PhysRevB.85.024201	2012
Resonant vibration control of three-bladed wind turbine rotors Krenk, Steen ; Svendsen, Martin Nymann ; Høgsberg, Jan Becker in journal: A I A A Journal (ISSN: 0001-1452) (DOI: http://dx.doi.org/10.2514/1.J051164), vol: 50, issue: 1, pages: 148-161, 2012 Type: Journal article - Journal article DOI: 10.2514/1.J051164	2012
Stability Analysis of an Industrial Gas Compressor Supported by Tilting-Pad Bearings Under Different Lubrication Regimes Cerda, Alejandro ; Santos, Ilmar in journal: Journal of Engineering for Gas Turbines and Power (ISSN: 0742-4795) (DOI: http://dx.doi.org/10.1115/1.4004214), vol: 134, issue: 2, pages: 022504, 2012 Type: Journal article - Journal article DOI: 10.1115/1.4004214	2012
Controllable Lubrication for Main Engine Bearings Using Mechanical and Piezoelectric Actuators Estupinan, Edgar ; Santos, Ilmar in journal: I E E E - A S M E Transactions on Mechatronics (ISSN: 1083-4435) (DOI: http://dx.doi.org/10.1109/TMECH.2010.2099663), vol: 17, issue: 2, pages: 279-287, 2012 Type: Journal article - Journal article DOI: 10.1109/TMECH.2010.2099663	2012
Experimental and numerical investigation of the internal kinetics of a surf-zone plunging breaker Emarat, Narumon ; Forehand, David I.M. ; Christensen, Erik Damgaard ; Greated, Clive A. in journal: European Journal of Mechanics B - Fluids (ISSN: 0997-7546) (DOI: http://dx.doi.org/10.1016/j.euromechflu.2011.09.002), vol: 32, pages: 1-16, 2012 Type: Journal article - Journal article DOI: 10.1016/j.euromechflu.2011.09.002	2012
The impact of turbulence intensity and atmospheric stability on power deficits due to wind turbine wakes at Horns Rev wind farm Hansen, Kurt Schaldemose ; Barthelmie, Rebecca J. ; Jensen, Leo E. ; Sommer, Anders in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.512), vol: 15, issue: 1, pages: 183-196, 2012 Type: Journal article - Journal article DOI: 10.1002/we.512	2012
Modeling wake effects in large wind farms in complex terrain: the problem, the methods and the issues Politis, E.S. ; Prospathopoulos, J. ; Cabezon, D. ; Hansen, Kurt Schaldemose ; Chaviaropoulos, P.K. ; Barthelmie, R.J. in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.481), vol: 15, issue: 1, pages: 161-182, 2012 Type: Journal article - Journal article DOI: 10.1002/we.481	2012
Validations and improvements of airfoil trailing-edge noise prediction models using detailed experimental data Kamruzzaman, M. ; Lutz, Th. ; Würz, W. ; Shen, Wen Zhong ; Zhu, Wei Jun ; Hansen, Martin Otto Laver ; Bertagnolio, Franck ; Aagaard Madsen, Helge in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.505), vol: 15, issue: 1, pages: 45-61, 2012 Type: Journal article - Journal article DOI: 10.1002/we.505	2012
Cleaving of TOPAS and PMMA microstructured polymer optical fibers: Core-shift and statistical quality optimization Stefani, Alessio ; Nielsen, Kristian ; Rasmussen, Henrik K. ; Bang, Ole in journal: Optics Communications (ISSN: 0030-4018) (DOI: http://dx.doi.org/10.1016/j.optcom.2011.12.033), vol: 285, issue: 7, pages: 1825-1833, 2012 Type: Journal article - Journal article DOI: 10.1016/j.optcom.2011.12.033	2012
Extended FEM modeling of crack paths near inclusions Nielsen, Chris Valentin ; Legarth, Brian Nyvang ; Niordson, Christian Frithiof in journal: International Journal for Numerical Methods in Engineering (ISSN: 0029-5981) (DOI: http://dx.doi.org/10.1002/nme.3268), vol: 89, pages: 786-804, 2012 Type: Journal article - Journal article DOI: 10.1002/nme.3268	2012
Validation of a zero-dimensional model for prediction of NOx and engine performance for electronically controlled marine two-stroke diesel engines Scappin, Fabio ; Stefansson, Sigurður H. ; Haglind, Fredrik ; Andreasen, Anders ; Larsen, Ulrik in journal: Applied Thermal Engineering (ISSN: 1359-4311) (DOI: http://dx.doi.org/10.1016/j.applthermaleng.2011.11.047), vol: 37, pages: 344-352, 2012 Type: Journal article - Journal article DOI: 10.1016/j.applthermaleng.2011.11.047	2012
Design of robust and efficient photonic switches using topology optimization Elesin, Yuriy ; Lazarov, Boyan Stefanov ; Jensen, Jakob Søndergaard ; Sigmund, Ole in journal: Photonics and Nanostructures (ISSN: 1569-4410) (DOI: http://dx.doi.org/10.1016/j.photonics.2011.10.003), vol: 10, issue: 1, pages: 153-165, 2012 Type: Journal article - Journal article DOI: 10.1016/j.photonics.2011.10.003	2012
Validation of the flow-through chamber (FTC) and steady-state (SS) methods for clearance rate measurements in bivalves Larsen, Poul Scheel ; Riisgård, Hans Ulrik in journal: Biology Open (ISSN: 2046-6390) (DOI: http://dx.doi.org/10.1242/bio.2011011), vol: 1, issue: 1, pages: 6-11, 2012 Type: Journal article - Journal article DOI: 10.1242/bio.2011011	2012
Effective viscosity of confined hydrocarbons Sivebæk, Ion Marius ; Samoilov, V.N. ; Persson, B.N.J. in journal: Physical Review Letters (ISSN: 0031-9007) (DOI: http://dx.doi.org/10.1103/PhysRevLett.108.036102), vol: 108, issue: 3, pages: 036102, 2012 Type: Journal article - Journal article DOI: 10.1103/PhysRevLett.108.036102	2012
Rezimy obtekanija vichrevogo generatora Velte, Clara Marika ; Okulov, Valery ; Naumov, I.V. in journal: Technical Physics Letters (ISSN: 1063-7850), vol: 38, issue: 8, pages: 54-62, 2012 Type: Journal article - Journal article	2012
Multiscale simulation of water flow past a C₅₄₀ fullerene Walther, Jens Honore ; Praprotnik, Matej ; Kotsalis, Evangelos M. ; Koumoutsakos, Petros in journal: Journal of Computational Physics (ISSN: 0021-9991) (DOI: http://dx.doi.org/10.1016/j.jcp.2011.12.015), vol: 231, issue: 7, pages: 2677-2681, 2012 Type: Journal article - Journal article DOI: 10.1016/j.jcp.2011.12.015	2012
Atomic resolution investigations of phase transformation from TaN to CrTaN in a steel matrix Danielsen, Hilmar Kjartansson ; Hald, John in journal: Materials Science Forum (ISSN: 0255-5476) (DOI: http://dx.doi.org/10.4028/www.scientific.net/MSF.706-709.823), vol: 706-709, pages: 823-828, 2012 Type: Conference article - Conference article Presented at: 7th International Conference on Processing and Manufacturing of Advanced Materials, Quebec City, QC DOI: 10.4028/www.scientific.net/MSF.706-709.823	2012
Dislocation density and Burgers vector population in fiber-textured Ni thin films determined by high-resolution X-ray line profile analysis Csiszár, Gábor ; Pantleon, Karen ; Alimadadi, Hossein ; Ribárik, Gábor ; Ungár, Tamás in journal: Journal of Applied Crystallography (ISSN: 0021-8898) (DOI: http://dx.doi.org/10.1107/S0021889811053234), vol: 45, issue: 1, pages: 61-70, 2012 Type: Journal article - Journal article DOI: 10.1107/S0021889811053234	2012
Hybrid state-space time integration of rotating beams Krenk, Steen ; Nielsen, Martin Bjerre in journal: Computer Methods in Applied Mechanics and Engineering (ISSN: 0045-7825) (DOI: http://dx.doi.org/10.1016/j.cma.2011.11.014), vol: 213-216, pages: 243-254, 2012 Type: Journal article - Journal article DOI: 10.1016/j.cma.2011.11.014	2012
Two-component micro injection moulding for hearing aid applications Islam, Aminul ; Hansen, Hans Nørgaard ; Marhöfer, David Maximilian ; Angel, Jais Andreas Breusch ; Dormann, B. ; Bondo, M. in journal: International Journal of Advanced Manufacturing Technology (ISSN: 0268-3768) (DOI: http://dx.doi.org/10.1007/s00170-011-3841-1), vol: 62, issue: 5-8, pages: 605-615, 2012 Type: Journal article - Journal article DOI: 10.1007/s00170-011-3841-1	2012
Probability of Parametric Roll in Random Seaways Jensen, Jørgen Juncher part of: Parametric Resonance in Dynamical Systems (ISBN: 978-1-4614-1042-3), pages: 91-106, 2012, Springer, Type: Book chapter - Book chapter	2012
Interaction mechanisms between slurry coatings and solid oxide fuel cell interconnect alloys during high temperature oxidation Persson, Åsa Helen ; Mikkelsen, Lars ; Hendriksen, Peter Vang ; Somers, Marcel A. J. in journal: Journal of Alloys and Compounds (ISSN: 0925-8388) (DOI: http://dx.doi.org/10.1016/j.jallcom.2011.12.095), vol: 521, pages: 16-29, 2012 Type: Journal article - Journal article DOI: 10.1016/j.jallcom.2011.12.095	2012
Geometrical design parameters for journal bearings with flexure pads and compliant liners Thomsen, Kim ; Klit, Peder in journal: Institution of Mechanical Engineers. Proceedings. Part J: Journal of Engineering Tribology (ISSN: 1350-6501) (DOI: http://dx.doi.org/10.1177/1350650111431525), vol: 226, issue: 4, pages: 274-283, 2012 Type: Journal article - Journal article DOI: 10.1177/1350650111431525	2012
Benchmarking of direct and indirect friction tests in micro forming Eriksen, Rasmus Solmer ; Calaon, Matteo ; Arentoft, M. ; Bay, Niels in journal: Key Engineering Materials (ISSN: 1013-9826) (DOI: http://dx.doi.org/10.4028/www.scientific.net/KEM.504-506.581), vol: 504-506, pages: 581-586, 2012 Type: Conference article - Conference article Presented at: 15th International ESAFORM Conference on Materials Forming, Erlangen DOI: 10.4028/www.scientific.net/KEM.504-506.581	2012
Reply to ‘On the ‘‘viscosity overshoot’’ during the uniaxial extension of a low density polyethylene’ Rasmussen, Henrik K. ; Hassager, Ole in journal: Journal of Non-Newtonian Fluid Mechanics (ISSN: 0377-0257) (DOI: http://dx.doi.org/10.1016/j.jnnfm.2012.01.004), vol: 171-172, pages: 106, 2012 Type: Journal article - Journal article DOI: 10.1016/j.jnnfm.2012.01.004	2012
Research on design methods and aerodynamics performance of CQUDTU-B21 airfoil Chen, Jin ; Cheng, Jiangtao ; Wen, Zhong Shen in journal: Advanced Materials Research (ISSN: 1022-6680) (DOI: http://dx.doi.org/10.4028/www.scientific.net/AMR.455-456.1486), vol: 455-456, pages: 1486-1490, 2012 Type: Journal article - Journal article Presented at: 2011 SSITE International Conference on Future Material Research and Industry Application DOI: 10.4028/www.scientific.net/AMR.455-456.1486	2012
Casting traceability with direct part marking using reconfigurable pin-type tooling based on paraffin–graphite actuators Vedel-Smith, Nikolaj Kjelgaard ; Lenau, Torben Anker in journal: Journal of Manufacturing Systems (ISSN: 0278-6125) (DOI: http://dx.doi.org/10.1016/j.jmsy.2011.12.001), vol: 31, issue: 2, pages: 113-120, 2012 Type: Journal article - Journal article DOI: 10.1016/j.jmsy.2011.12.001	2012
Cobalt spot test used for diagnosis of occupationally-related exposure to cobalt-containing powder. Thyssen, Jacob P ; Johansen, Jeanne D ; Jellesen, Morten Stendahl ; Menné, Torkil in journal: Contact Dermatitis (ISSN: 0105-1873) (DOI: http://dx.doi.org/10.1111/j.1600-0536.2012.02008.x), vol: 66, issue: 4, pages: 228-229, 2012 Type: Journal article - Journal article DOI: 10.1111/j.1600-0536.2012.02008.x	2012
The Betz–Joukowsky limit: on the contribution to rotor aerodynamics by the British, German and Russian scientific schools Okulov, Valery ; van Kuik, Gijs A.M. in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.464), vol: 15, issue: 2, pages: 335-344, 2012 Type: Journal article - Journal article DOI: 10.1002/we.464	2012
Flow induced particle migration in fresh concrete: Theoretical frame, numerical simulations and experimental results on model fluids Spangenberg, Jon ; Roussel, N. ; Hattel, Jesper Henri ; Stang, Henrik ; Skocek, Jan ; Geiker, Mette Rica in journal: Cement and Concrete Research (ISSN: 0008-8846) (DOI: http://dx.doi.org/10.1016/j.cemconres.2012.01.007), vol: 42, issue: 4, pages: 633-641, 2012 Type: Journal article - Journal article DOI: 10.1016/j.cemconres.2012.01.007	2012
A Structured Review and Classification of Demolding Issues and Proven Solutions Delaney, K. D. ; Bissacco, Giuliano ; Kennedy, D. in journal: International Polymer Processing (ISSN: 0930-777X) (DOI: http://dx.doi.org/10.3139/217.2514), vol: 27, issue: 1, pages: 77-90, 2012 Type: Journal article - Journal article DOI: 10.3139/217.2514	2012
Laminar-Turbulent transition on Wind Turbines Martinez Hernandez, Gabriel Gerardo ; Sørensen, Jens Nørkær ; Shen, Wen Zhong Type: Ph.d. thesis - Ph.d. thesis	2012
A solidification model for unmodified, Na-modified and Sr-modified Al-Si alloys Tiedje, Niels Skat ; Hattel, Jesper Henri ; Taylor, J. A. ; Easton, M. A. part of: The 3rd International Conference on Advances in Solidification Processes, Rolduc Abbey 2011, pages: 012033, 2012, IOP Publishing Ltd, Type: Article in proceedings - Article in proceedings Presented at: ICASP-3, Kerkrade DOI: 10.1088/1757-899X/27/1/012033	2012
Towards all-dielectric, polarization-independent optical cloaks Andkjær, Jacob Anders ; Mortensen, N. Asger ; Sigmund, Ole in journal: Applied Physics Letters (ISSN: 0003-6951) (DOI: http://dx.doi.org/10.1063/1.3691835), vol: 100, issue: 10, pages: Paper 101106, 2012 Type: Journal article - Journal article DOI: 10.1063/1.3691835	2012
Environmental Performance Evaluation of Ro-Ro Passenger Ferry Transportation Kristensen, Hans Otto Holmegaard ; Hagemeister, Constantin Type: Working paper - Working paper	2012
1 2 3 4 5 6 7 8 9 Next

Search for more in DTU Orbit

Top

Nils Koppels Allé

Building 403

DK-2800 Kgs. Lyngby

Tel (+45) 45 25 19 60

VAT 30060946