David Bue Pedersen

David Bue Pedersen

Senior Researcher

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 322

2800 Kgs. Lyngby

Ph.
Fax +45 45 93 01 90
E-mail dbpe@mek.dtu.dk
ORCID 0000-0002-7013-7614
Home page

Request a vCard via e-mail.

Publications
Projects
DTU news
Loading

Publications rss feed

2018
 

Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing

Comminal, Raphaël Benjamin ; Serdeczny, Marcin Piotr ; Pedersen, David Bue ; Spangenberg, Jon
in: Additive Manufacturing (ISSN: 2214-8604), vol: 20, pages: 68-76, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.addma.2017.12.013

 

Thermal behaviour of additively manufactured injection moulding inserts

Hofstätter, Thomas ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
part of: Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology, 2018, The European Society for Precision Engineering and Nanotechnology,
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18), 2018, Venice

Type: Conference abstract in proceedings (Peer reviewed)

Status: Accepted/In press     |    Year: 2018

  PDF

Evolution of Additively Manufactured Injection Molding Inserts Investigated by Thermal Simulations

Hofstätter, Thomas ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
Presented at:
34th International Confernce of the Polymer Processing Society, 2018, Taipei

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Flow Characteristics of a Thermoset Fiber Composite Photopolymer Resin in a Vat Polymerization Additive Manufacturing Process

Hofstätter, Thomas ; Spangenberg, Jon ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
Presented at:
34th International Confernce of the Polymer Processing Society, 2018, Taipei

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Internal Fiber Structure of a High-Performing, Additively Manufactured Injection Molding Insert

Hofstätter, Thomas ; Baier, Sina ; Trinderup, Camilla Himmelstrup ; Gundlach, Carsten ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
Presented at:
34th International Confernce of the Polymer Processing Society, 2018, Taipei

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2018

 

Direct fabrication of bio-inspired gecko-like geometries with vat polymerization additive manufacturing method

Davoudinejad, Ali ; Mendez Ribo, Macarena ; Pedersen, David Bue ; Islam, Aminul ; Tosello, Guido
in: Journal of Micromechanics and Microengineering (ISSN: 0960-1317), vol: 28, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1088/1361-6439/aabf17

 

Geometrical shape assessment of additively manufactured features by direct light processing vat polymerization method

Péreza, Lucia C. Díaz ; Davoudinejad, Ali ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabraa, José A. ; Tosello, Guido
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18), 2018, Venice

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Additive manufacturing with vat polymerization method for precision polymer micro components production

Davoudinejad, Ali ; Péreza, Lucia C. Díaz ; Quagliotti, Danilo ; Pedersen, David Bue ; Garcíaa, José A. Albajez ; Yagüe-Fabra, José A. ; Tosello, Guido
in: Procedia C I R P (ISSN: 2212-8271), vol: 75, pages: 98-102, 2018
Presented at:
15th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2018), 2018, Milan

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.procir.2018.04.049

 

Recent Developments in Fiber-Reinforced Additive Manufacturing of Injection Molding Inserts

Hofstätter, Thomas ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
Presented at:
2018 ASPE and euspen Summer Topical Meeting, 2018, Berkeley

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2018

  PDF

Assessment of sub-mm features replication capability in injection moulding using a multi-cavity tool produced by additive manufacturing

Davoudinejad, Ali ; Charalambis, Alessandro ; Zhang, Yang ; Calaon, Matteo ; Pedersen, David Bue ; Tosello, Guido ; Hansen, Hans Nørgaard
Presented at:
18th International Conference of the european Society for Precision Engineering and Nanotechnology (euspen 18), 2018, Venice

Type: Poster (Peer reviewed)

Status: Published     |    Year: 2018


http://www.mek.dtu.dk/english/Service/Phonebook/Person?id=22693&tab=2&qt=dtupublicationquery
23 SEPTEMBER 2018