Publications

You can also search directly in Orbit, DTU's research database.

Publikationer rss feed

2018
 

Statistical investigations into the erosion of material from the tool in micro-electrical discharge machining

Puthumana, Govindan
in journal: i-Manager's Journal on Mechanical Engineering (ISSN: 2230-9055), 2018

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2018

 

High temperature solution-nitriding and low-temperature nitriding of AISI 316: Effect on pitting potential and crevice corrosion performance

Bottoli, Federico ; Jellesen, Morten Stendahl ; Christiansen, Thomas Lundin ; Winther, Grethe ; Somers, Marcel A. J.
in journal: Applied Surface Science (ISSN: 0169-4332) (DOI: http://dx.doi.org/10.1016/j.apsusc.2017.06.094), vol: 431, pages: 24-31, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.apsusc.2017.06.094

 

Qualification and testing of CT systems

Bartscher, Markus ; Neuschaefer-Rube, Ulrich ; Illemann, Jens ; Borges de Oliveira, Fabrício ; Stolfi, Alessandro ; Carmignato, Simone
part of: Industrial X-Ray Computed Tomography (ISBN: 978-3-319-59571-9), pages: 185-228, 2018, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1007/978-3-319-59573-3_6

 

Error sources

Stolfi, Alessandro ; De Chiffre, Leonardo ; Kasperl, Stefan
part of: Industrial X-Ray Computed Tomography (ISBN: 978-3-319-59571-9), pages: 143-184, 2018, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1007/978-3-319-59573-3_5

 

Sea State Estimation Using Vessel Response in Dynamic Positioning

H. Brodtkorb, Astrid ; Nielsen, Ulrik Dam ; J. Sørensen, Asgeir
in journal: Applied Ocean Research (ISSN: 0141-1187) (DOI: http://dx.doi.org/10.1016/j.apor.2017.09.005), vol: 70, pages: 76–86, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.apor.2017.09.005

 

Response predictions using the observed autocorrelation function

Nielsen, Ulrik Dam ; H. Brodtkorb, Astrid ; Jensen, Jørgen Juncher
in journal: Marine Structures (ISSN: 0951-8339) (DOI: http://dx.doi.org/10.1016/j.marstruc.2017.10.012), vol: 58, pages: 31–52, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.marstruc.2017.10.012

 

Local analytical sensitivity analysis for design of continua with optimized 3D buckling behavior

Pedersen, Niels Leergaard ; Pedersen, Pauli
in journal: Structural and Multidisciplinary Optimization (ISSN: 1615-147X) (DOI: http://dx.doi.org/10.1007/s00158-017-1755-8), vol: 57, issue: 1, pages: 293–304, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1007/s00158-017-1755-8

 

Interlaboratory Comparison of a physical and a virtual assembly measured by CT

Stolfi, Alessandro ; De Chiffre, Leonardo
in journal: Precision Engineering (ISSN: 0141-6359) (DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.08.018), vol: 51, pages: 263-270, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.08.018

 

A homogenization method for ductile-brittle composite laminates at large deformations

Poulios, Konstantinos ; Niordson, Christian Frithiof
in journal: International Journal for Numerical Methods in Engineering (ISSN: 0029-5981) (DOI: http://dx.doi.org/10.1002/nme.5637), vol: 113, issue: 5, pages: 814–833 , 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1002/nme.5637

 

Recent research trends in organic Rankine cycle technology: A bibliometric approach

Imran, Muhammad ; Haglind, Fredrik ; Asim, Muhammad ; Zeb Alvi, Jahan
in journal: Renewable and Sustainable Energy Reviews (ISSN: 1364-0321) (DOI: http://dx.doi.org/10.1016/j.rser.2017.08.028), vol: 81, pages: 552-562, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.rser.2017.08.028

 

Ecodesign Implementation and LCA

McAloone, Tim C. ; Pigosso, Daniela Cristina Antelmi
part of: Life Cycle Assessment (ISBN: 978-3-319-56474-6), pages: 545-576, 2018, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1007/978-3-319-56475-3_23

 

Life Cycle Costing: An Introduction

Rödger, Jan-Markus ; Kjær, Louise Laumann ; Pagoropoulos, Aris
part of: Life Cycle Assessment (ISBN: 978-3-319-56474-6), pages: 373-399, 2018, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1007/978-3-319-56475-3_15

 

Effects of micro-injection moulding process parameters on accuracy and precision of thermoplastic elastomer micro rings

Baruffi, Federico ; Calaon, Matteo ; Tosello, Guido
in journal: Precision Engineering (ISSN: 0141-6359) (DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.09.006), vol: 51, pages: 353-361, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.09.006

 

Optimization of organic Rankine cycle power systems considering multistage axial turbine design

Meroni, Andrea ; Andreasen, Jesper Graa ; Persico, Giacomo ; Haglind, Fredrik
in journal: Applied Energy (ISSN: 0306-2619) (DOI: http://dx.doi.org/10.1016/j.apenergy.2017.09.068), vol: 209, pages: 339-354, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.apenergy.2017.09.068

 

Hardening and strengthening behavior in rate-independent strain gradient crystal plasticity

Nellemann, Christopher ; Niordson, Christian Frithiof ; Nielsen, Kim Lau
in journal: European Journal of Mechanics A - Solids (ISSN: 0997-7538) (DOI: http://dx.doi.org/10.1016/j.euromechsol.2017.09.006), vol: 67, pages: 157-168, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.euromechsol.2017.09.006

 

A “poor man's approach” to topology optimization of cooling channels based on a Darcy flow model

Zhao, Xi ; Zhou, Mingdong ; Sigmund, Ole ; Andreasen, Casper Schousboe
in journal: International Journal of Heat and Mass Transfer (ISSN: 0017-9310) (DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.09.090), vol: 116, pages: 1108-1123, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2017.09.090

 

Near-wellbore modeling of a horizontal well with Computational Fluid Dynamics

Szanyi, Márton L. ; Hemmingsen, Casper Schytte ; Yan, Wei ; Walther, Jens Honore ; Glimberg, Stefan L.
in journal: Journal of Petroleum Science and Engineering (ISSN: 0920-4105) (DOI: http://dx.doi.org/10.1016/j.petrol.2017.10.011), vol: 160, pages: 119-128, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.petrol.2017.10.011

 

Evaluation of damping estimates by automated Operational Modal Analysis for offshore wind turbine tower vibrations

Bajric, Anela ; Høgsberg, Jan Becker ; Rüdinger, Finn
in journal: Renewable Energy (ISSN: 0960-1481) (DOI: http://dx.doi.org/10.1016/j.renene.2017.03.043), vol: 116, pages: 153-163, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.renene.2017.03.043

 

Evaluation of a Lagrangian Soot Tracking Method for the prediction of primary soot particle size under engine-like conditions

Cai Ong, Jiun ; Pang, Kar Mun ; Walther, Jens Honore ; Ho, Jee-Hou ; Kiat Ng, Hoon
in journal: Journal of Aerosol Science (ISSN: 0021-8502) (DOI: http://dx.doi.org/10.1016/j.jaerosci.2017.10.013), vol: 70-95, pages: 70-95, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.jaerosci.2017.10.013

 

Optimal design of robust piezoelectric unimorph microgrippers

Ruiz, David ; Díaz-Molina, Alex ; Sigmund, Ole ; Donoso, Alberto ; Carlos Bellido, José ; Sánchez-Rojas, José Luis
in journal: Applied Mathematical Modelling (ISSN: 0307-904X) (DOI: http://dx.doi.org/10.1016/j.apm.2017.10.024), vol: 55, pages: 1-12, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.apm.2017.10.024

 

Uncovering the local inelastic interactions during manufacture of ductile cast iron: How the substructure of the graphite particles can induce residual stress concentrations in the matrix

Andriollo, Tito ; Hellström, Kristina ; Sonne, Mads Rostgaard ; Thorborg, Jesper ; Tiedje, Niels Skat ; Hattel, Jesper Henri
in journal: Journal of the Mechanics and Physics of Solids (ISSN: 0022-5096) (DOI: http://dx.doi.org/10.1016/j.jmps.2017.11.005), vol: 111, pages: 333–357, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.jmps.2017.11.005

 

Compressed collagen constructs with optimized mechanical properties and cell interactions for tissue engineering applications

Ajalloueian, Fatemeh ; Nikogeorgos, Nikolaos ; Ajalloueian, Ali ; Fossum, Magdalena ; Lee, Seunghwan ; Chronakis, Ioannis S.
in journal: International Journal of Biological Macromolecules (ISSN: 0141-8130) (DOI: http://dx.doi.org/10.1016/j.ijbiomac.2017.11.117), vol: 108, pages: 158-166, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.ijbiomac.2017.11.117

 

Electrochemical profiling of multi-clad aluminium sheets used in automotive heat exchangers

Bordo, Kirill ; Gudla, Visweswara Chakravarthy ; Peguet, Lionel ; Afseth, Andreas ; Ambat, Rajan
in journal: Corrosion Science (ISSN: 0010-938X) (DOI: http://dx.doi.org/https://doi.org/10.1016/j.corsci.2017.11.011), vol: 131, pages: 28-37, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/https://doi.org/10.1016/j.corsci.2017.11.011

 

Optimal design of robust piezoelectric microgrippers undergoing large displacements

Ruiz, D. ; Sigmund, Ole
in journal: Structural and Multidisciplinary Optimization (ISSN: 1615-147X) (DOI: http://dx.doi.org/10.1007/s00158-017-1863-5), vol: 75, pages: 71-82, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1007/s00158-017-1863-5

 

Experimental comparison of the nonlinear dynamic behavior of a rigid rotor interacting with two types of different radial backup bearings: Ball & pinned

Fonseca, Cesar A.L.L. ; Santos, Ilmar ; Weber, Hans I.
in journal: Tribology International (ISSN: 0301-679X) (DOI: http://dx.doi.org/10.1016/j.triboint.2017.07.018), vol: 119, pages: 250-261, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.triboint.2017.07.018

 

Topology optimization of turbulent flows

Dilgen, Cetin Batur ; Dilgen, Sümer Bartug ; Fuhrman, David R. ; Sigmund, Ole ; Lazarov, Boyan Stefanov
in journal: Computer Methods in Applied Mechanics and Engineering (ISSN: 0045-7825) (DOI: http://dx.doi.org/10.1016/j.cma.2017.11.029), vol: 331, pages: 363–393, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.cma.2017.11.029

 

Numerical simulation of condensation of sulfuric acid and water in a large two-stroke marine diesel engine

Karvounis, Nikolas ; Pang, Kar Mun ; Mayer, Stefan ; Walther, Jens Honore
in journal: Applied Energy (ISSN: 0306-2619) (DOI: http://dx.doi.org/10.1016/j.apenergy.2017.11.085), vol: 211, pages: 1009-1020, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.apenergy.2017.11.085

 

A regularization method for solving the Poisson equation for mixed unbounded-periodic domains

Spietz, Henrik Juul ; Hejlesen, Mads Mølholm ; Walther, Jens Honore
in journal: Journal of Computational Physics (ISSN: 0021-9991) (DOI: http://dx.doi.org/10.1016/j.jcp.2017.12.018), vol: 356, pages: 439–447, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.jcp.2017.12.018

 

System evaluation of offshore platforms with gas liquefaction processes

Nguyen, Tuong-Van ; de Oliveira Júnior, Silvio
in journal: Energy (ISSN: 0360-5442) (DOI: http://dx.doi.org/10.1016/j.energy.2017.12.043), vol: 144, pages: 594–606, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.energy.2017.12.043

 

Review of friction modeling in metal forming processes

Nielsen, Chris Valentin ; Bay, Niels Oluf
in journal: Journal of Materials Processing Technology (ISSN: 0924-0136) (DOI: http://dx.doi.org/10.1016/j.jmatprotec.2017.12.023), vol: 255, pages: 234–241, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.jmatprotec.2017.12.023

  PDF

Numerical simulation of the planar extrudate swell of pseudoplastic and viscoelastic fluids with the streamfunction and the VOF methods

Comminal, Raphaël Benjamin ; Pimenta, Francisco ; Hattel, Jesper Henri ; Alves, Manuel A. ; Spangenberg, Jon
in journal: Journal of Non-Newtonian Fluid Mechanics (ISSN: 0377-0257) (DOI: http://dx.doi.org/10.1016/j.jnnfm.2017.12.005), vol: 252, pages: 1–18, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.jnnfm.2017.12.005

 

Quantification of local mobilities

Zhang, Yubin
in journal: Scripta Materialia (ISSN: 1359-6462) (DOI: http://dx.doi.org/10.1016/j.scriptamat.2017.12.012), vol: 146, pages: 286-289, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.scriptamat.2017.12.012

 

Surface technology is essential for transition to a hydrogen-based energy system

Nielsen, L. P. ; Leisner, P. ; Møller, Per
in journal: Transactions of the Institute of Metal Finishing (ISSN: 0020-2967) (DOI: http://dx.doi.org/10.1080/00202967.2018.1403093), vol: 96, issue: 1, pages: 8-10, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1080/00202967.2018.1403093

 

Activation energy of time-dependent martensite formation in steel

Villa, Matteo ; Somers, Marcel A. J.
part of: Proceedings of the International Conference on Martensitic Transformations (ICOMAT 2017), 2018,
Presented at:
International Conference on Martensitic Transformations 2017, 2017, Chicago

Type: Article in proceedings (Peer reviewed)

Status: Accepted/In press     |    Year: 2018

 

A systematic comparison of on-axis and off-axis transmission Kikuchi diffraction

Nießen, Frank ; Burrows, Andrew ; Bastos da Silva Fanta, Alice
in journal: Ultramicroscopy (ISSN: 0304-3991) (DOI: http://dx.doi.org/10.1016/j.ultramic.2017.12.017), 2018

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.ultramic.2017.12.017

 

Electrochemical profiling of multi-clad aluminium sheets used in automotive heat exchangers

Bordo, Kirill ; Gudla, Visweswara Chakravarthy ; Peguet, Lionel ; Afseth, Andreas ; Ambat, Rajan
in journal: Corrosion Science (ISSN: 0010-938X) (DOI: http://dx.doi.org/10.1016/j.corsci.2017.11.011), vol: 131, pages: 28-37, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.corsci.2017.11.011

 

Estimation of hysteretic damping of structures by stochastic subspace identification

Bajric, Anela ; Høgsberg, Jan Becker
in journal: Mechanical Systems and Signal Processing (ISSN: 0888-3270) (DOI: http://dx.doi.org/10.1016/j.ymssp.2017.11.042), vol: 105, pages: 36-50, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.ymssp.2017.11.042

 

Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing

Comminal, Raphaël Benjamin ; Serdeczny, Marcin Piotr ; Pedersen, David Bue ; Spangenberg, Jon
in journal: Additive Manufacturing (ISSN: 2214-8604) (DOI: http://dx.doi.org/10.1016/j.addma.2017.12.013), vol: 20, pages: 68-76, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1016/j.addma.2017.12.013

  PDF

The UV filtering potential of drop-casted layers of frustules of three diatom species

Su, Yanyan ; Lenau, Torben Anker ; Gundersen, Emil ; Kirkensgaard, Jacob J. K. ; Maibohm, Christian ; Pinti, Jerome Pierre Alexandre ; Ellegaard, Marianne
in journal: Scientific Reports (ISSN: 2045-2322) (DOI: http://dx.doi.org/10.1038/s41598-018-19596-4), vol: 8, 2018

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2018     |    DOI: http://dx.doi.org/10.1038/s41598-018-19596-4

2017
  PDF

GEOMETRICAL CALIBRATION OF X-RAY CT SCANNERS

Stolfi, Alessandro (Inventor) ; De Chiffre, Leonardo
Patent no.: EP3195802, Date: 26-07-2017

Type: Patent

Status: Published     |    Year: 2017

 

A case hardened component of titanium

Christiansen, Thomas Lundin (Inventor) ; Jellesen, Morten Stendahl (Inventor) ; Somers, Marcel A. J. (Inventor) ; Gammeltoft-Hansen, Niklas Brinckman (Inventor)
Patent no.: WO2017207794, Date: 07-12-2017

Type: Patent

Status: Published     |    Year: 2017

  PDF

Self-closing sheet for encapsulating and dumping a bulk of material

Hjelmager Jensen, Jacob (Inventor)
Patent no.: WO2017025262, Date: 16-02-2017

Type: Patent

Status: Published     |    Year: 2017

 

Pressure-assisted forming of non-concentric tubular cross sections with solid medium

Alves, Luis M. ; Silva, Carlos M.A. ; Nielsen, Chris Valentin ; Martins, Paulo A.F.
in journal: Institution of Mechanical Engineers. Proceedings. Part B: Journal of Engineering Manufacture (ISSN: 0954-4054) (DOI: http://dx.doi.org/10.1177/0954405415625913), vol: 23, issue: 12, pages: 2123–2132, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1177/0954405415625913

  PDF

Is Earth recognized as a finite system in corporate responsibility reporting?

Bjørn, Anders ; Bey, Niki ; Georg, Susse ; Røpke, Inge ; Hauschild, Michael Zwicky
in journal: Journal of Cleaner Production (ISSN: 0959-6526) (DOI: http://dx.doi.org/10.1016/j.jclepro.2015.12.095), vol: 163, pages: 106-117, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.jclepro.2015.12.095

  PDF

A DSM-based framework for integrated function modelling

Eisenbart, Boris ; Gericke, Kilian ; Blessing, Lucienne T. M. ; McAloone, Tim C.
in journal: Research in Engineering Design (ISSN: 0934-9839) (DOI: http://dx.doi.org/10.1007/s00163-016-0228-1), vol: 28, issue: 1, pages: 25–51, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s00163-016-0228-1

  PDF

Topology optimization for optical microlithography with partially coherent illumination

Zhou, Mingdong ; Lazarov, Boyan Stefanov ; Sigmund, Ole
in journal: International Journal for Numerical Methods in Engineering (ISSN: 0029-5981) (DOI: http://dx.doi.org/10.1002/nme.5299), vol: 109, issue: 5, pages: 631–647, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/nme.5299

  PDF

Pre-oxidation and its effect on reducing high-temperature corrosion of superheater tubes during biomass firing

Okoro, Sunday Chukwudi ; Kvisgaard, M. ; Montgomery, Melanie ; Jappe Frandsen, Flemming ; Pantleon, Karen
in journal: Surface Engineering (ISSN: 0267-0844) (DOI: http://dx.doi.org/10.1080/02670844.2016.1199128), vol: 33, issue: 6, pages: 428-432, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1080/02670844.2016.1199128

  PDF

A model-based approach to associate complexity and robustness in engineering systems

Göhler, Simon Moritz ; D. Frey, Daniel ; Howard, Thomas J.
in journal: Research in Engineering Design (ISSN: 0934-9839) (DOI: http://dx.doi.org/10.1007/s00163-016-0236-1), vol: 28, pages: 223–234, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s00163-016-0236-1

 

Interfacial Crack Arrest in Sandwich Panels with Embedded Crack Stoppers Subjected to Fatigue Loading

Martakos, G. ; Andreasen, J. H. ; Berggreen, Christian ; Thomsen, O. T.
in journal: Applied Composite Materials (ISSN: 0929-189X) (DOI: http://dx.doi.org/10.1007/s10443-016-9514-3), vol: 24, pages: 55-76, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s10443-016-9514-3

  PDF

Topology optimization of inertia driven dosing units

Andreasen, Casper Schousboe
in journal: Structural and Multidisciplinary Optimization (ISSN: 1615-147x) (DOI: http://dx.doi.org/10.1007/s00158-016-1573-4), vol: 55, issue: 4, pages: 1301–1309, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s00158-016-1573-4

 

The ternary Fe-C-N system: Homogeneous distributions of nitrogen and carbon

Brink, Bastian ; Ståhl, Kenny ; Christiansen, Thomas Lundin ; Somers, Marcel A. J.
in journal: Journal of Alloys and Compounds (ISSN: 0925-8388) (DOI: http://dx.doi.org/10.1016/j.jallcom.2016.08.130), vol: 690, pages: 431-437, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.jallcom.2016.08.130

  PDF

Application of aluminum diffusion coatings to mitigate the KCl-induced high-temperature corrosion

Kiamehr, Saeed ; Lomholt, T. N. ; Dahl, Kristian Vinter ; Christiansen, Thomas Lundin ; Somers, Marcel A. J.
in journal: Materials and Corrosion (ISSN: 0947-5117) (DOI: http://dx.doi.org/10.1002/maco.201609047), vol: 68, issue: 1, pages: 82–94, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/maco.201609047

 

Optimization of a flexible multi-generation system based on wood chip gasification and methanol production

Lythcke-Jørgensen, Christoffer Ernst ; Clausen, Lasse Røngaard ; Algren, Loui ; Bavnhøj Hansen, Anders ; Münster, Marie ; Gadsbøll, Rasmus Østergaard ; Haglind, Fredrik
in journal: Applied Energy (ISSN: 0306-2619) (DOI: http://dx.doi.org/10.1016/j.apenergy.2016.08.092), vol: 192, pages: 337–359, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.apenergy.2016.08.092

 

POD Mode Robustness for the Turbulent Jet Sampled with PIV

Hodzic, Azur ; Meyer, Knud Erik ; Velte, Clara Marika
part of: Whither Turbulence and Big Data in the 21st Century? (ISBN: 978-3-319-41215-3), pages: 163-188, 2016, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/978-3-319-41217-7_10

 

Conversion of Measured Turbulence Spectra from Temporal to Spatial Domain

Buchhave, Preben ; Velte, Clara Marika
part of: Whither Turbulence and Big Data in the 21st Century? (ISBN: 978-3-319-41215-3), pages: 343-362, 2016, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/978-3-319-41217-7_18

 

CFD simulation and statistical analysis of moisture transfer into an electronic enclosure

Shojaee Nasirabadi, Parizad ; Jabbaribehnam, Mirmasoud ; Hattel, Jesper Henri
in journal: Applied Mathematical Modelling (ISSN: 0307-904x) (DOI: http://dx.doi.org/10.1016/j.apm.2016.09.004), vol: 44, pages: 246–260, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.apm.2016.09.004

 

Printed Circuit Board Surface Finish and Effects of Chloride Contamination, Electric Field, and Humidity on Corrosion Reliability

Gudla, Helene Virginie Conseil ; Jellesen, Morten Stendahl ; Ambat, Rajan
in journal: Journal of Electronic Materials (ISSN: 0361-5235) (DOI: http://dx.doi.org/10.1007/s11664-016-4974-7), vol: 46, issue: 2, pages: 817–825, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s11664-016-4974-7

 

A review of solar energy based heat and power generation systems

Modi, Anish ; Bühler, Fabian ; Andreasen, Jesper Graa ; Haglind, Fredrik
in journal: Renewable & Sustainable Energy Reviews (ISSN: 1364-0321) (DOI: http://dx.doi.org/10.1016/j.rser.2016.09.075), vol: 67, pages: 1047-1064, 2017

Type: Review (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.rser.2016.09.075

 

Characterisation and full-scale production testing of multifunctional surfaces for deep drawing applications

Godi, Alessandro ; Grønbæk, J. ; De Chiffre, Leonardo
in journal: C I R P - Journal of Manufacturing Science and Technology (ISSN: 1755-5817) (DOI: http://dx.doi.org/10.1016/j.cirpj.2016.07.001), vol: 16, pages: 64–71, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.cirpj.2016.07.001

  PDF

Prediction of properties of new halogenated olefins using two group contribution approaches

Montagud, Maria E. Mondejar ; Cignitti, Stefano ; Abildskov, Jens ; Woodley, John ; Haglind, Fredrik
in journal: Fluid Phase Equilibria (ISSN: 0378-3812) (DOI: http://dx.doi.org/10.1016/j.fluid.2016.10.020), vol: 433, pages: 79-96, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.fluid.2016.10.020

 

Effect of carbon on interstitial ordering and magnetic properties of ε-Fe2(N,C)1-z

Brink, Bastian ; Ståhl, Kenny ; Christiansen, Thomas Lundin ; Frandsen, Cathrine ; Hansen, Mikkel Fougt ; Beran, Přemysl ; Somers, Marcel A. J.
in journal: Journal of Alloys and Compounds (ISSN: 0925-8388) (DOI: http://dx.doi.org/10.1016/j.jallcom.2016.09.317), vol: 694, pages: 282-291, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.jallcom.2016.09.317

  PDF

Optimized constitutive distributions visualized by lamina formulas

Pedersen, Pauli ; Pedersen, Niels Leergaard
in journal: Mechanics of Advanced Materials and Structures (ISSN: 1537-6494) (DOI: http://dx.doi.org/10.1080/15376494.2016.1191097), vol: 24, issue: 5, pages: 385-391, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1080/15376494.2016.1191097

 

CFD modeling of particle behavior in supersonic flows with strong swirls for gas separation

Yang, Yan ; Wen, Chuang
in journal: Separation and Purification Technology (ISSN: 1383-5866) (DOI: http://dx.doi.org/10.1016/j.seppur.2016.10.002), vol: 174, pages: 22-28, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.seppur.2016.10.002

  PDF

Active tuned mass damper for damping of offshore wind turbine vibrations

Brodersen, Mark Laier ; Bjørke, Ann-Sofie ; Høgsberg, Jan Becker
in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.2063), vol: 20, issue: 5, pages: 783–796, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/we.2063

 

Calibration of piezoelectric RL shunts with explicit residual mode correction

Høgsberg, Jan Becker ; Krenk, Steen
in journal: Journal of Sound and Vibration (ISSN: 0022-460x) (DOI: http://dx.doi.org/10.1016/j.jsv.2016.08.028), vol: 386, pages: 65-81, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.jsv.2016.08.028

 

Geothermal Power Technologies

Montagud, Maria E. Mondejar ; Chamorro, C.R.
part of: Reference Module in Earth Systems and Environmental Sciences, pages: 51-61, 2016, Elsevier Science,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/B978-0-12-409548-9.10095-8

  PDF

Chemically extracted nanocellulose from sisal fibres by a simple and industrially relevant process

Trifol Guzman, Jon ; Sillard, Cecile ; Plackett, D. ; Szabo, Peter ; Bras, Julien ; Daugaard, Anders Egede
in journal: Cellulose (ISSN: 0969-0239) (DOI: http://dx.doi.org/10.1007/s10570-016-1097-5), vol: 24, issue: 1, pages: 107–118, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s10570-016-1097-5

 

Current trends in micro electrical discharge machining (µEDM) for practical applications

Puthumana, Govindan
in journal: International Journal of Automotive and Mechanical Engineering (ISSN: 2229-8649), 2017

Type: Journal article (Peer reviewed)

Status: Submitted     |    Year: 2017

 

An approach to the modeling study and analysis of tool electrode wear mechanisms in micro electrical discharge milling

Puthumana, Govindan
in journal: Journal of Advanced Mechanical Engineering (ISSN: 2162-9870), 2017

Type: Journal article (Peer reviewed)

Status: Submitted     |    Year: 2017

 

Modeling and evaluation of the influence of micro-EDM sparking state settings on the tool electrode wear behavior

Puthumana, Govindan
in journal: i-Manager's Journal on Mechanical Engineering (ISSN: 2230-9055), vol: 7, issue: 1, pages: 28-34, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017

 

Response surface modelling of tool electrode wear rate and material removal rate in micro electrical discharge machining of Inconel 718

Puthumana, Govindan
in journal: i-Manager's Journal on Material Science (ISSN: 2347-2235), vol: 4, issue: 4, pages: 1-9, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017

 

A Novel Integrated Approach for Analysis and Evaluation of Control Factor Effects on Volumetric Tool Wear Rate (Vtwr) in Micro-EDM

Puthumana, Govindan
in journal: Facta Universitatis. Series Mechanical Engineering (ISSN: 0354-2025), 2017

Type: Journal article (Peer reviewed)

Status: Submitted     |    Year: 2017

 

Modal interaction and higher harmonic generation in a weakly nonlinear, periodic mass–spring chain

Frandsen, Niels Morten Marslev ; Jensen, Jakob Søndergaard
in journal: Wave Motion (ISSN: 0165-2125) (DOI: http://dx.doi.org/10.1016/j.wavemoti.2016.09.002), vol: 68, pages: 149-161, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.wavemoti.2016.09.002

 

On the Controllability and Observability of Actively Lubricated Journal Bearings with Pads Featuring Different Nozzle-Pivot Configurations

Salazar, Jorge Andrés González ; Santos, Ilmar
in journal: Journal of Tribology (ISSN: 0742-4787) (DOI: http://dx.doi.org/10.1115/1.4033053), vol: 139, issue: 3, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1115/1.4033053

 

Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel

Winther, Grethe ; Wright, Jonathan P. ; Schmidt, Søren ; Oddershede, Jette
in journal: International Journal of Plasticity (ISSN: 0749-6419) (DOI: http://dx.doi.org/10.1016/j.ijplas.2016.10.004), vol: 88, pages: 108-125, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.ijplas.2016.10.004

  PDF

Higher-order multi-resolution topology optimization using the finite cell method

Groen, Jeroen Peter ; Langelaar, Matthijs ; Sigmund, Ole ; Ruess, Martin
in journal: International Journal for Numerical Methods in Engineering (ISSN: 0029-5981) (DOI: http://dx.doi.org/10.1002/nme.5432), vol: 110, issue: 10, pages: 903–920 , 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/nme.5432

 

An experimental investigation of heat transfer enhancement in minichannel: Combination of nanofluid and micro fin structure techniques

Zhang, Ji ; Diao, Yanhua ; Zhao, Yaohua ; Zhang, Yanni
in journal: Experimental Thermal and Fluid Science (ISSN: 0894-1777) (DOI: http://dx.doi.org/10.1016/j.expthermflusci.2016.10.001), vol: 81, pages: 21-32, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.expthermflusci.2016.10.001

 

Joining end-to-end tubing of dissimilar materials by forming

Alves, L.M. ; Nielsen, Chris Valentin ; Silva, C.M.A. ; Martins, P.A.F.
in journal: International Journal of Pressure Vessels and Piping (ISSN: 0308-0161) (DOI: http://dx.doi.org/10.1016/j.ijpvp.2016.11.006), vol: 149, pages: 24-32, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.ijpvp.2016.11.006

  PDF

Effect of flue gas composition on deposit induced high temperature corrosion under laboratory conditions mimicking biomass firing. Part I: Exposures in oxidizing and chlorinating atmospheres

Okoro, Sunday Chukwudi ; Kiamehr, Saeed ; Montgomery, Melanie ; Jappe Frandsen, Flemming ; Pantleon, Karen
in journal: Materials and Corrosion (ISSN: 0947-5117) (DOI: http://dx.doi.org/10.1002/maco.201609173), vol: 68, issue: 15, pages: 499–514 , 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/maco.201609173

 

Asymptotically Matched Layer (AML) for transient wave propagation in a moving frame of reference

Madsen, Stine Skov ; Krenk, Steen
in journal: Computers and Geotechnics (ISSN: 0266-352X) (DOI: http://dx.doi.org/10.1016/j.compgeo.2016.09.005), vol: 82, pages: 124-133, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.compgeo.2016.09.005

 

A Method for Ship Collision Damage and Energy Absorption Analysis and its Validation

Zhang, Shengming ; Pedersen, Preben Terndrup
in journal: Ships and Offshore Structures (ISSN: 1744-5302) (DOI: http://dx.doi.org/10.1080/17445302.2016.1254584), vol: 20, issue: 5, pages: 783–796, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1080/17445302.2016.1254584

 

Measurement of turbulent kinetic energy spectrum - Part 1: Convection record method

Buchhave, Preben ; Velte, Clara Marika
part of: Progress in Turbulence and Wind Energy VII - Proceedings of the iTi Conference in Turbulence 2016 (ISBN: 978-3-319-57933-7), pages: 163-169, 2017, Springer,
Presented at:
iTi Conference on Turbulence VII, 2016, Bertinoro

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/978-3-319-57934-4_23

 

Measurement of turbulent kinetic energy spectrum - Part 2: Convection record measurements

Velte, Clara Marika ; Buchhave, Preben ; Hodzic, Azur
part of: Progress in Turbulence and Wind Energy VII - Proceedings of the iTi Conference in Turbulence 2016 (ISBN: 978-3-319-57933-7), pages: 171-176, 2017, Springer,
Presented at:
iTi Conference on Turbulence VII, 2016, Bertinoro

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/978-3-319-57934-4_24

 

Kinetics analysis of two-stage austenitization in supermartensitic stainless steel

Nießen, Frank ; Villa, Matteo ; Hald, John ; Somers, Marcel A. J.
in journal: Materials & Design (ISSN: 0264-1275) (DOI: http://dx.doi.org/10.1016/j.matdes.2016.11.076), vol: 116, pages: 8-15, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.matdes.2016.11.076

  PDF

Effect of flue gas composition on deposit induced high temperature corrosion under laboratory conditions mimicking biomass firing. Part II: Exposures in SO2 containing atmospheres

Okoro, Sunday Chukwudi ; Kiamehr, Saeed ; Montgomery, Melanie ; Jappe Frandsen, Flemming ; Pantleon, Karen
in journal: Materials and Corrosion (ISSN: 0947-5117) (DOI: http://dx.doi.org/10.1002/maco.201609174), vol: 68, issue: 5, pages: 515-528, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1002/maco.201609174

 

A concise account of techniques available for shipboard sea state estimation

Nielsen, Ulrik Dam
in journal: Ocean Engineering (ISSN: 0029-8018) (DOI: http://dx.doi.org/10.1016/j.oceaneng.2016.11.035), vol: 129, pages: 352-362, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.oceaneng.2016.11.035

 

Active tilting-pad journal bearings supporting flexible rotors: Part II–The model-based feedback-controlled lubrication

Salazar, Jorge Andrés González ; Santos, Ilmar
in journal: Tribology International (ISSN: 0301-679X) (DOI: http://dx.doi.org/10.1016/j.triboint.2016.11.019), vol: 107, pages: 106-115, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.triboint.2016.11.019

 

Active tilting-pad journal bearings supporting flexible rotors: Part I – The hybrid lubrication

Salazar, Jorge Andrés González ; Santos, Ilmar
in journal: Tribology International (ISSN: 0301-679X) (DOI: http://dx.doi.org/10.1016/j.triboint.2016.11.018), vol: 107, pages: 94-105, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.triboint.2016.11.018

 

Flow visualization and simulation of the filling process during injection molding

Guerrier, Patrick ; Tosello, Guido ; Hattel, Jesper Henri
in journal: C I R P - Journal of Manufacturing Science and Technology (ISSN: 1755-5817) (DOI: http://dx.doi.org/10.1016/j.cirpj.2016.08.002), vol: 16, pages: 12–20, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.cirpj.2016.08.002

 

Modeling of the effect of tool wear per discharge estimation error on the depth of machined cavities in micro-EDM milling

Puthumana, Govindan ; Bissacco, Giuliano ; Hansen, Hans Nørgaard
in journal: International Journal of Advanced Manufacturing Technology (ISSN: 0268-3768) (DOI: http://dx.doi.org/10.1007/s00170-017-0371-5), vol: 92, issue: 9-12, pages: 3253-3264, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s00170-017-0371-5

 

Impact mechanics of ship collisions and validations with experimental results

Zhang, Shengming ; Villavicencio, R. ; Zhu, L. ; Pedersen, Preben Terndrup
in journal: Marine Structures (ISSN: 0951-8339) (DOI: http://dx.doi.org/10.1016/j.marstruc.2016.12.003), vol: 52, pages: 69-81, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.marstruc.2016.12.003

 

Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig

Danielsen, Hilmar Kjartansson ; Guzmán, F. Gutiérrez ; Dahl, Kristian Vinter ; Li, Y.J. ; Wu, J. ; Jacobs, G. ; Burghardt, G. ; Fæster, Søren ; Alimadadi, Hossein ; Goto, S. ; Raabe, D. ; Petrov, R.
in journal: Wear (ISSN: 0043-1648) (DOI: http://dx.doi.org/10.1016/j.wear.2016.11.016), vol: 370-371, pages: 73-82, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.wear.2016.11.016

  PDF

Non-Invasive Parameter Identification in Rotordynamics via Fluid Film Bearings: Linking Active Lubrication and Operational Modal Analysis

Santos, Ilmar ; Svendsen, Peter Kjær
in journal: Journal of Engineering for Gas Turbines and Power (ISSN: 0742-4795) (DOI: http://dx.doi.org/10.1115/1.4035447), vol: 139, 2017
Presented at:
ASME Turbo Expo 2016, 2016, Seoul

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1115/1.4035447

  PDF

Numerical modelling of the erosion and deposition of sand inside a filter layer

Jacobsen, Niels Gjøl ; van Gent, Marcel R. A. ; Fredsøe, Jørgen
in journal: Coastal Engineering (ISSN: 0378-3839) (DOI: http://dx.doi.org/10.1016/j.coastaleng.2016.09.003), vol: 120, pages: 47-63, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.coastaleng.2016.09.003

 

Modelling of LEG tilting pad journal bearings with active lubrication

Cerda Varela, Alejandro Javier ; García, Asier Bengoechea ; Santos, Ilmar
in journal: Tribology International (ISSN: 0301-679X) (DOI: http://dx.doi.org/10.1016/j.triboint.2016.11.033), vol: 107, pages: 250-263, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.triboint.2016.11.033

 

Microstructure of Z-phase strengthened martensitic steels: Meeting the 650°C challenge

Liu, Fang ; Rashidi, Masoud ; Hald, John ; Reißig, Lutz ; Andrén, Hans Olof
in journal: Materials Science Forum (ISSN: 0255-5476) (DOI: http://dx.doi.org/10.4028/www.scientific.net/MSF.879.1147), vol: 879, pages: 1147-1152, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.4028/www.scientific.net/MSF.879.1147

 

The development of a computational platform to design and simulate on-board hydrogen storage systems

Mazzucco, Andrea ; Rokni, Masoud
in journal: International Journal of Hydrogen Energy (ISSN: 0360-3199) (DOI: http://dx.doi.org/10.1016/j.ijhydene.2016.10.051), vol: 42, pages: 2187-2200, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.ijhydene.2016.10.051

 

Fibre laser nitriding of titanium and its alloy in open atmosphere for orthopaedic implant applications: Investigations on surface quality, microstructure and tribological properties

Chan, Chi-Wai ; Lee, Seunghwan ; Smith, Graham C. ; Donaghy, Clare
in journal: Surface and Coatings Technology (ISSN: 0257-8972) (DOI: http://dx.doi.org/10.1016/j.surfcoat.2016.12.036), vol: 309, pages: 628-640, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.surfcoat.2016.12.036

 

RANS-based simulation of wave-induced sheet-flow transport of graded sediments

Calistan, Ugur ; Fuhrman, David R.
in journal: Coastal Engineering (ISSN: 0378-3839) (DOI: http://dx.doi.org/10.1016/j.coastaleng.2016.11.007), vol: 121, pages: 90-102, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1016/j.coastaleng.2016.11.007

  PDF

Complementary Methods for the Characterization of Corrosion Products on a Plant-Exposed Superheater Tube

Okoro, Sunday Chukwudi ; Nießen, Frank ; Villa, Matteo ; Apel, Daniel ; Montgomery, Melanie ; Jappe Frandsen, Flemming ; Pantleon, Karen
in journal: Metallography, Microstructure, and Analysis (ISSN: 2192-9262) (DOI: http://dx.doi.org/10.1007/s13632-016-0325-6), vol: 6, issue: 1, pages: 22–35, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/s13632-016-0325-6