Knud Erik Meyer

Knud Erik Meyer

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Fluid Mechanics, Coastal and Maritime Engineering

Technical University of Denmark

Richard Petersens Plads

Building 322, room 226

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail kem@mek.dtu.dk
ORCID 0000-0003-2179-0235
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
CV
DTU news
Loading

Publications rss feed

2017
 

POD Mode Robustness for the Turbulent Jet Sampled with PIV

Hodzic, Azur ; Meyer, Knud Erik ; Velte, Clara Marika
part of: Whither Turbulence and Big Data in the 21st Century? (ISBN: 978-3-319-41215-3), pages: 163-188, 2016, Springer,

Type: Book chapter (Peer reviewed)

Status: Published     |    Year: 2017     |    DOI: http://dx.doi.org/10.1007/978-3-319-41217-7_10

2016
  PDF

Reconstruction of 3D flow structures in a cylindrical cavity with a rotating lid

Meyer, Knud Erik
Presented at:
EUROMECH Colloquium 581: Dynamics of Concentrated Vortices, 2016, Novosibirsk

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2016

  PDF

Continuous vs. pulsating flow boiling. Part 1: Experimental comparison and visualization

Kærn, Martin Ryhl ; Elmegaard, Brian ; Meyer, Knud Erik ; Palm, Björn
part of: Proceedings of the 16th International Refrigeration and Air Conditioning Conference, 2016,
Presented at:
16th International Refrigeration and Air Conditioning Conference, 2016, West Lafayette, IN

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

  PDF

Continuous vs. pulsating flow boiling. Part 2: Statistical comparison using response surface methodology

Kærn, Martin Ryhl ; Elmegaard, Brian ; Meyer, Knud Erik ; Palm, Björn ; Holst, Jørgen
part of: Proceedings of the 16th International Refrigeration and Air Conditioning Conference, 2016,
Presented at:
16th International Refrigeration and Air Conditioning Conference, 2016, West Lafayette, IN

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

2015
 

Flow and edge scour in current adjacent to stone covers

Petersen, Thor U. ; Sumer, B. Mutlu ; Bøgelund, Jon ; Yazici, Asli ; Fredsøe, Jørgen ; Meyer, Knud Erik
in journal: Journal of Waterway, Port, Coastal, and Ocean Engineering (ISSN: 0733-950X) (DOI: http://dx.doi.org/10.1061/(ASCE)WW.1943-5460.0000287), vol: 141, issue: 4, 2015

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2015     |    DOI: http://dx.doi.org/10.1061/(ASCE)WW.1943-5460.0000287

2014
 

Large eddy simulations of the influence of piston position on the swirling flow in a model two-stroke diesel engine

Obeidat, Anas Hassan MohD ; Schnipper, Teis ; Ingvorsen, Kristian Mark ; Haider, Sajjad ; Meyer, Knud Erik ; Mayer, Stefan ; Walther, Jens Honore
in journal: International Journal of Numerical Methods for Heat and Fluid Flow (ISSN: 0961-5539) (DOI: http://dx.doi.org/10.1108/HFF-09-2011-0189), vol: 24, issue: 2, pages: 325-341, 2014

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: http://dx.doi.org/10.1108/HFF-09-2011-0189

 

Turbulent swirling flow in a dynamic model of a uniflow-scavenged two-stroke engine

Ingvorsen, Kristian Mark ; Meyer, Knud Erik ; Walther, Jens Honore ; Mayer, Stefan
in journal: Experiments in Fluids (ISSN: 0723-4864) (DOI: http://dx.doi.org/10.1007/s00348-014-1748-y), vol: 55, 2014

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2014     |    DOI: http://dx.doi.org/10.1007/s00348-014-1748-y

  PDF

PIV and LDA measurements of the swirling flow in a low-speed two-stroke diesel engine

Ingvorsen, Kristian Mark ; Meyer, Knud Erik ; Walther, Jens Honore ; Mayer, S.
Presented at:
10th European Fluid Mechanics Conference (EUROMECH), 2014, KGs. Lyngby

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2014

  PDF

Tomographic PIV measurements behind vortex generators

Meyer, Knud Erik ; Velte, Clara Marika ; Jaunet, V. ; Bøtkjær, N. ; Hess, D.
Presented at:
10th European Fluid Mechanics Conference (EUROMECH), 2014, KGs. Lyngby

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2014

 

A numerical and experimental study of the scavenging process in a two-stroke marine diesel engine

Hemmingsen, Casper Schytte ; Ingvorsen, Kristian Mark ; Walther, Jens Honore ; Meyer, Knud Erik
Presented at:
10th European Fluid Mechanics Conference (EUROMECH), 2014, KGs. Lyngby

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2014