Jakob Skov Nielsen

Jakob Skov Nielsen

Laboratory Engineer

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 427, room 303

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 48 70
E-mail jniel@mek.dtu.dk
ORCID 0000-0002-3337-5429
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
Loading

Publications rss feed

2016
 

Calibration of a Numerical Model for Heat Transfer and Fluid Flow in an Extruder

Hofstätter, Thomas ; Pedersen, David Bue ; Nielsen, Jakob Skov ; Pimentel, Rodrigo ; Mischkot, Michael ; Hansen, Hans Nørgaard
in journal: International Journal of Rapid Manufacturing (ISSN: 1757-8817), vol: 6, issue: 1, pages: 1-16, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016

 

A Model of Parallel Kinematics for Machine Calibration

Pedersen, David Bue ; Bæk Nielsen, Morten ; Kløve Christensen, Simon ; Nielsen, Jakob Skov ; Hansen, Hans Nørgaard
part of: Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, 2016,
Presented at:
2nd International Conference on Progress in Additive Manufacturing, 2016, Singapore

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

A Self-Peeling Vat for Improved Release Capabilities During DLP Materials Processing

Pedersen, David Bue ; Zhang, Yang ; Nielsen, Jakob Skov ; Hansen, Hans Nørgaard
part of: Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, 2016,
Presented at:
2nd International Conference on Progress in Additive Manufacturing, 2016, Singapore

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Adaptive Layer Height During DLP Materials Processing

Pedersen, David Bue ; Zhang, Yang ; Nielsen, Jakob Skov ; Hansen, Hans Nørgaard
part of: Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, 2016,
Presented at:
2nd International Conference on Progress in Additive Manufacturing, 2016, Singapore

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

Investigation of digital light processing using fibre-reinforced polymers

Hofstätter, Thomas ; Pedersen, David Bue ; Nielsen, Jakob Skov ; Mischkot, Michael ; Hansen, Hans Nørgaard
part of: Proceedings of euspen’s 16th International Conference & Exhibition, 2016,
Presented at:
euspen’s 16th International Conference & Exhibition, 2016, Nottingham

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2016

 

A self-calibrating robot based upon a virtual machine model of parallel kinematics

Pedersen, David Bue ; Eiríksson, Eyþór Rúnar ; Hansen, Hans Nørgaard ; Nielsen, Jakob Skov
in journal: Virtual and Physical Prototyping (Online) (ISSN: 1745-2767) (DOI: http://dx.doi.org/10.1080/17452759.2016.1208363), vol: 11, issue: 3, pages: 227-234, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2016     |    DOI: http://dx.doi.org/10.1080/17452759.2016.1208363

2014
 

A Comparative Performance Analysis of FDM Machines Based on a Calibration Artefact

D'Angelo, Greta ; Nielsen, Jakob Skov ; Rasmussen, Jeppe ; Pedersen, David Bue
part of: Proceedings of the 29th Annual Meeting of the American Society for Precision Engineering, 2015,
Presented at:
29th Annual Meeting of the American Society for Precision Engineering, 2014, Boston

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

  PDF

Performance verification of 3D printers

Hansen, Hans Nørgaard ; Nielsen, Jakob Skov ; Rasmussen, Jakob ; Pedersen, David Bue
part of: Proceedings of ASPE 2014 Spring Topical Meeting (ISBN: 978-1-887706-64-3), pages: 104-108, 2015, American Society for Precision Engineering,
Presented at:
2014 ASPE Spring Topical Meeting, 2014, Berkeley

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

 

Rendering of surface-geometries at job-generation level for camouflaging the layered nature of Additively Manufactured parts

Pedersen, David Bue ; Hansen, Hans Nørgaard ; Nielsen, Jakob Skov ; D'Angelo, Greta
part of: Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 129-133, 2015,
Presented at:
14th International Conference of the European Society for Precision Engineering and Nanotechnology, 2014, Dubrovnik

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014

 

Applicability of chemical vapour polishing of additive manufactured parts to meet production-quality

Pedersen, David Bue ; Hansen, Hans Nørgaard ; Nielsen, Jakob Skov ; D'Angelo, Greta
part of: Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology, pages: 125-128, 2015,
Presented at:
14th International Conference of the European Society for Precision Engineering and Nanotechnology, 2014, Dubrovnik

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2014