Kristian Vinter Dahl

Kristian Vinter Dahl

Seniorforsker

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Materiale- og Overfladeteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 425, rum 132

2800 Kgs. Lyngby

Tlf.
Fax 45 93 62 13
E-mail kvd@mek.dtu.dk
ORCID 0000-0002-2528-0470
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
Loading

Publikationer rss feed

2017
 

Application of aluminum diffusion coatings to mitigate the KCl-induced high-temperature corrosion

Kiamehr, Saeed ; Lomholt, T. N. ; Dahl, Kristian Vinter ; Christiansen, Thomas Lundin ; Somers, Marcel A. J.
in journal: Materials and Corrosion (ISSN: 0947-5117) (DOI: http://dx.doi.org/10.1002/maco.201609047), vol: 68, issue: 1, pages: 82–94, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1002/maco.201609047

 

Multiscale characterization of White Etching Cracks (WEC) in a 100Cr6 bearing from a thrust bearing test rig

Danielsen, Hilmar Kjartansson ; Guzmán, F. Gutiérrez ; Dahl, Kristian Vinter ; Li, Y.J. ; Wu, J. ; Jacobs, G. ; Burghardt, G. ; Fæster, Søren ; Alimadadi, Hossein ; Goto, S. ; Raabe, D. ; Petrov, R.
in journal: Wear (ISSN: 0043-1648) (DOI: http://dx.doi.org/10.1016/j.wear.2016.11.016), vol: 370-371, pages: 73-82, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.wear.2016.11.016

 

Thermochemical Surface Engineering: A Playground for Science and Innovation

Christiansen, Thomas Lundin ; Dahl, Kristian Vinter ; Jellesen, Morten Stendahl ; Somers, Marcel A. J.
part of: Proceedings of the 24th IFHTSE Congress , 2017,
Presented at:
24th International Federation for Heat Treatment and Surface Engineering Congress (IFHTSE Congress 2017), 2017, Nice

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2017

 

Hard Surface Layers by Pack Boriding and Gaseous Thermo-Reactive Deposition and Diffusion Treatments

Christiansen, Thomas Lundin ; Bottoli, Federico ; Dahl, Kristian Vinter ; Gammeltoft-Hansen, N. B. ; Laursen, M. B. ; Somers, Marcel A. J.
in journal: Materials Performance and Characterization (ISSN: 2165-3992) (DOI: http://dx.doi.org/10.1520/MPC20160106), vol: 6, issue: 4, pages: 1-17, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1520/MPC20160106

2016
 

KCl-induced high temperature corrosion of selected commercial alloys. Part II: alumina and silica-formers

Kiamehr, Saeed ; Dahl, Kristian Vinter ; Montgomery, Melanie ; Somers, Marcel A. J.
in journal: Materials and Corrosion (ISSN: 0947-5117) (DOI: http://dx.doi.org/10.1002/maco.201408215), vol: 67, issue: 1, pages: 26-38, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2016     |    DOI: http://dx.doi.org/10.1002/maco.201408215

 

Laboratory Investigations of Ni-Al Coatings Exposed to Conditions Simulating Biomass Firing

Wu, Duoli ; Okoro, Sunday Chukwudi ; Dahl, Kristian Vinter ; Montgomery, Melanie ; Pantleon, Karen ; Hald, John
part of: Proceedings of the 9th International Symposium on High-Temperature Corrosion and Protection of Materials, 2016,
Presented at:
9th International Symposium on High-Temperature Corrosion and Protection of Materials, 2016, Les Embiez Island

Type: Article in proceedings

Status: Published     |    År: 2016

 

Low-Temperature Nitriding of Deformed Austenitic Stainless Steels with Various Nitrogen Contents Obtained by Prior High-Temperature Solution Nitriding

Bottoli, Federico ; Winther, Grethe ; Christiansen, Thomas Lundin ; Dahl, Kristian Vinter ; Somers, Marcel A. J.
in journal: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (ISSN: 1073-5623) (DOI: http://dx.doi.org/10.1007/s11661-016-3559-7), vol: 47, issue: 8, pages: 4146-4159, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2016     |    DOI: http://dx.doi.org/10.1007/s11661-016-3559-7

 

New strategy for testing new high nitrogen bearing steel for offshore wind turbines

Belfiore, Nicola Pio ; Arcobello Varlese, Francesca ; Battistella, Fabio ; Blass, Toni ; Cabral, Ana Maria ; Diehl, Volkher ; Gonzalez Garcia, José Ramón ; Gorjão, Paula F. ; Holweger, Walter ; Kohlhepp, Matt ; Christiansen, Thomas Lundin ; Ritzenhoff, Roman ; Stocchi, Domenico ; Trojahn, Werner ; Dahl, Kristian Vinter
in journal: Wind Engineering (ISSN: 0309-524X) (DOI: http://dx.doi.org/10.1177/0309524X16659991), vol: 40, issue: 5, pages: 426-430, 2016

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2016     |    DOI: http://dx.doi.org/10.1177/0309524X16659991

2015
 

Microstructural investigations of pure nickel exposed to KCl induced high temperature corrosion

Jonsson, T. ; Slomian, A. ; Lomholt, Trine Nybo ; Kiamehr, Saeed ; Dahl, Kristian Vinter
in journal: Materials at High Temperatures (ISSN: 0960-3409) (DOI: http://dx.doi.org/10.1179/0960340914Z.00000000060), vol: 32, issue: 1-2, pages: 44-49, 2015

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2015     |    DOI: http://dx.doi.org/10.1179/0960340914Z.00000000060

 

Characterization of Transition Metal Carbide Layers Synthesized by Thermo-reactive Diffusion Processes

Laursen, Mads Brink ; Fernandes, Frederico Augusto Pires ; Christiansen, Thomas Lundin ; Dahl, Kristian Vinter ; Somers, Marcel A. J.
part of: Surface Modification Technologies XXVIII. Proceedings of the Twenty Eighth International Conference on Surface Modification Technologies (ISBN: 978-81-926196-1-3), pages: 643-654, 2015, VALARDOCS,
Presented at:
28th International Conference on Surface Modification Technologies, 2014, Tampere

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2015