Leonardo De Chiffre

Leonardo De Chiffre

Professor

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 425, rum 206

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail ldch@mek.dtu.dk
ORCID 0000-0002-6141-9580
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
DTU nyheder
Loading

Publikationer rss feed

2017
 

Characterisation and full-scale production testing of multifunctional surfaces for deep drawing applications

Godi, Alessandro ; Grønbæk, J. ; De Chiffre, Leonardo
in journal: C I R P - Journal of Manufacturing Science and Technology (ISSN: 1755-5817) (DOI: http://dx.doi.org/10.1016/j.cirpj.2016.07.001), vol: 16, pages: 64–71, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.cirpj.2016.07.001

  PDF

Traceability investigation in Computed Tomography using industry-inspired workpieces

Kraemer, Alexandra ; Stolfi, Alessandro ; Schneider, Timm ; De Chiffre, Leonardo ; Lanza, Gisela
part of: Proceedings of the 7th Conference on Industrial Computed Tomography (iCT 2017), 2017,
Presented at:
7th Conference on Industrial Computed Tomography (iCT 2017), 2017, Leuven

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2017

  PDF

Integrated Quality Control of Precision Assemblies using Computed Tomography

Stolfi, Alessandro ; De Chiffre, Leonardo (Main supervisor) ; Carli, Lorenzo (Supervisor)
Danmarks Tekniske Universitet (DTU), pages: 198

Type: Ph.D. thesis

Status: Published     |    År: 2017

  PDF

Characterizing Green Fiber Bottle Prototypes Using Computed Tomography

Saxena, Prateek ; Bissacco, Giuliano ; Stolfi, Alessandro ; De Chiffre, Leonardo
part of: Proceedings of the 7th Conference on Industrial Computed Tomography (iCT 2017), 2017,
Presented at:
7th Conference on Industrial Computed Tomography (iCT 2017), 2017, Leuven

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2017

 

Error sources

Stolfi, Alessandro ; De Chiffre, Leonardo ; Kasperl, Stefan
part of: Industrial X-Ray Computed Tomography (ISBN: 978-3-319-59571-9), 2017, Springer,

Type: Book chapter (Peer reviewed)

Status: Accepted/In press     |    År: 2017

  PDF

Material testing of copper by extrusion-cutting

Segalina, F. ; De Chiffre, Leonardo
in journal: Procedia C I R P (ISSN: 2212-8271) (DOI: http://dx.doi.org/10.1016/j.procir.2017.03.240), vol: 58, pages: 375-380, 2017
Presented at:
16th CIRP Conference on Modelling of Machining Operations, 2017, Cluny

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.procir.2017.03.240

 

Interlaboratory Comparison of a physical and a virtual assembly measured by CT

Stolfi, Alessandro ; De Chiffre, Leonardo
in journal: Precision Engineering (ISSN: 0141-6359) (DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.08.018), 2017

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.precisioneng.2017.08.018

2016
 

Traceability of Height Measurements on Green Sand Molds using Optical 3D Scanning

Mohaghegh, Kamran ; Yazdanbakhsh, S.A. ; Tiedje, N. S. ; De Chiffre, Leonardo
part of: Proceedings of the CastExpo & 120th Metalcasting Congress, 2016, American Foundry Society,
Presented at:
CastExpo & 120th Metalcasting Congress, 2016, Minneapolis

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2016

  PDF

Accuracy Enhancement of CT Measurements using Data Filtering

Stolfi, Alessandro ; Kallasse, Maarja-Helena ; Carli, Lorenzo ; De Chiffre, Leonardo
part of: Proceedings of the 6th Conference on Industrial Computed Tomography (iCT 2016), 2016,
Presented at:
6th Conference on Industrial Computed Tomography, 2016, Wels

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2016

  PDF

Selection of items for “InteraqCT Comparison on Assemblies”

Stolfi, Alessandro ; De Chiffre, Leonardo
part of: Proceedings of the 6th Conference on Industrial Computed Tomography (iCT 2016), 2016,
Presented at:
6th Conference on Industrial Computed Tomography, 2016, Wels

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2016