Jens Honore Walther

Jens Honore Walther

Professor

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Fluid Mekanik, Vandbygning og Maritim Teknik

Danmarks Tekniske Universitet

Nils Koppels Allé

Bygning 403, rum 110

2800 Kgs. Lyngby

Tlf.
Fax 45 25 19 61
E-mail jhw@mek.dtu.dk
ORCID 0000-0001-8100-9178
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Kurser
CV
Loading

Publikationer rss feed

2017
 

Wake structure and thrust generation of a flapping foil in two-dimensional flow

Andersen, Anders Peter ; Bohr, Tomas ; Schnipper, Teis ; Walther, Jens Honore
in journal: Journal of Fluid Mechanics (ISSN: 0022-1120) (DOI: http://dx.doi.org/10.1017/jfm.2016.808), vol: 812, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1017/jfm.2016.808

 

Modelling of temporal and spatial evolution of sulphur oxides and sulphuric acid under large, two-stroke marine engine-like conditions using integrated CFD-chemical kinetics

Pang, Kar Mun ; Karvounis, Nikolas ; Walther, Jens Honore ; Schramm, Jesper ; Glarborg, Peter ; Mayer, Stefan
in journal: Applied Energy (ISSN: 0306-2619) (DOI: http://dx.doi.org/10.1016/j.apenergy.2017.02.020), vol: 193, pages: 60-73, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.apenergy.2017.02.020

 

Iterative Brinkman penalization for simulation of impulsively started flow past a sphere and a circular disc

Spietz, Henrik Juul ; Hejlesen, Mads Mølholm ; Walther, Jens Honore
in journal: Journal of Computational Physics (ISSN: 0021-9991) (DOI: http://dx.doi.org/10.1016/j.jcp.2017.01.064), vol: 336, pages: 261–274, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.jcp.2017.01.064

 

Slip divergence of water flow in graphene nanochannels: the role of chirality

Wagemann, Enrique ; Oyarzua, Elton ; Walther, Jens Honore ; Zambrano, Harvey A
in journal: Physical Chemistry Chemical Physics (ISSN: 1463-9076) (DOI: http://dx.doi.org/10.1039/c6cp07755b), vol: 19, pages: 8646-8652, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1039/c6cp07755b

 

CFD modeling of condensation process of water vapor in supersonic flows

Yang, Yan ; Walther, Jens Honore ; Yan, Yuying ; Wen, Chuang
in journal: Applied Thermal Engineering (ISSN: 1359-4311) (DOI: http://dx.doi.org/10.1016/j.applthermaleng.2017.01.047), vol: 115, pages: 1357-1362, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.applthermaleng.2017.01.047

 

Characterization and Erosion Modeling of a Nozzle-Based Inflow-Control Device

Olsen, Jógvan Juul ; Hemmingsen, Casper Schytte ; Bergmann, Line ; Nielsen, Kenny K. ; Glimberg, Stefan L. ; Walther, Jens Honore
in journal: S P E Journal (ISSN: 1086-055X) (DOI: http://dx.doi.org/10.2118/186090-PA), 2017

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2017     |    DOI: http://dx.doi.org/10.2118/186090-PA

 

Investigation of journal orbit and flow pattern in a dynamically loaded journal bearing

Christiansen, Christian Kim ; Walther, Jens Honore ; Klit, Peder ; Vølund, Anders
in journal: Tribology International (ISSN: 0301-679X) (DOI: http://dx.doi.org/10.1016/j.triboint.2017.04.013), vol: 114, pages: 450-457, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.triboint.2017.04.013

 

Hybrid vortex simulations of wind turbines using a three-dimensional viscous-inviscid panel method

Ramos García, Néstor ; Hejlesen, Mads Mølholm ; Sørensen, Jens Nørkær ; Walther, Jens Honore
in journal: Wind Energy (ISSN: 1095-4244) (DOI: http://dx.doi.org/10.1002/we.2126), 2017

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2017     |    DOI: http://dx.doi.org/10.1002/we.2126

 

Hydrodynamics of microbial filter feeding

Nielsen, Lasse Tor ; Asadzadeh, Seyed Saeed ; Dölger, Julia ; Walther, Jens Honore ; Kiørboe, Thomas ; Andersen, Anders Peter
in journal: Proceedings of the National Academy of Sciences of the United States of America (ISSN: 0027-8424) (DOI: http://dx.doi.org/10.1073/pnas.1708873114), vol: 114, issue: 35, pages: 9373-9378, 2017

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2017     |    DOI: http://dx.doi.org/10.1073/pnas.1708873114

 

Cavity prediction in sand mould production applying the DISAMATIC process

Hovad, Emil ; Larsen, Per ; Spangenberg, Jon ; Walther, Jens Honore ; Thorborg, Jesper ; Hattel, Jesper Henri
in journal: Powder Technology (ISSN: 0032-5910) (DOI: http://dx.doi.org/10.1016/j.powtec.2017.08.037), 2017

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2017     |    DOI: http://dx.doi.org/10.1016/j.powtec.2017.08.037