Publikationer

Du kan også lave en søgning direkte i Orbit, DTU's forskningsdatabase. 

Publikationer rss feed

2020
 

A Batch Blending System for Continuous Production of Multi-Component Fuel Blends for Engine Laboratory Tests

Larsson, Terra ; Erlandsson, Anders
in: S A E Technical Papers
Presented at:
Powertrains, Fuels & Lubricants Meeting 2020

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    År: 2020

 

Active Warping Control For Damping Of Torsional Beam Vibrations

Hoffmeyer, David ; Høgsberg, Jan
part of: Proceedings of the 9th Conference on Smart Structures and Materials SMART 2019, 2020
Presented at:
IX ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2019)

Type: Article in proceedings (Peer reviewed)

Status: Accepted/In press     |    År: 2020

  PDF

A Design Specification Chain: A Concept for Improving Revision Management and Change Tracking

Bertram, Christian Alexander ; Rasmussen, Jeppe Bredahl ; Müller, Georg Otto ; Mortensen, Niels Henrik
part of: Proceedings of NordDesign 2020, 2020
Presented at:
NordDesign2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.35199/NORDDESIGN2020.61

  PDF

A Design Support Tool for Improving Maintenance Scheduling Process

Khalid, W. ; Soleymani, I. ; Sigsgaard, K. V. ; Hansen, K. B. ; Agergaard, J. K. ; Mortensen, N. H.
part of: Proceedings of the Design Society: DESIGN Conference, pages: 957-966, 2020
Presented at:
Design 2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1017/dsd.2020.126

  PDF

A development approach towards user-centered front-ends for knowledge-based engineering configurators: a study within planning of robot-based automation solutions

Schäffer , Eike ; Shafiee, Sara ; Frühwald , Tobias ; Franke , Jörg
part of: Proceedings of the 22nd International Configuration Workshop, pages: 47-52, 2020
Presented at:
22nd International Configuration Workshop (CONFWS'20)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Advanced exergy analysis of heat pumps with different eco-friendly working fluids

Voloshchuk, Volodymyr ; Gullo, Paride ; Nekrashevych, Olena
Presented at:
6th International Conference on Contemporary Problems of Thermal Engineering

Type: Paper (Peer reviewed)

Status: Published     |    År: 2020

 

Analysis of Transient Vibrations for Estimating Bolted Joint Tightness

Brøns, M. ; Thomsen, J. J. ; Sah, S. M. ; Tcherniak, D. ; Fidlin, A.
part of: Nonlinear Structures and Systems, pages: 21-24, 2020
Presented at:
37th Conference and Exposition on Structural Dynamics (IMAC 2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/978-3-030-12391-8_3

  PDF

Application of Methanol with an Ignition Promotor in a Medium Speed CI engine

Cordtz, Rasmus F. ; Cheng, Chong ; Thomsen, Thomas B. ; Schramm, Jesper
Presented at:
Rostock Large Engine Symposium (RGMT 2020)

Type: Paper (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Approaches to analyzing multi-functional problems

Svendsen, Nicklas Werge ; Lenau, Torben Anker
part of: Proceedings of NordDesign 2020, 2020
Presented at:
NordDesign 2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.35199/NORDDESIGN2020.50

 

Barriers for virtual assessment of structural robustness

Nerenst, Tim Brix ; Ebro, Martin ; Nielsen, Morten ; Eifler, Tobias ; Nielsen, Kim Lau
part of: Conference Proceedings - International Mechanical Engineering Congress & Exposition, 2020
Presented at:
ASME 2019 International Mechanical Engineering Congress and Exposition

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1115/imece2019-11251

  PDF

Caisson Breakwater for LNG & Bulk Terminals: A Study on Limiting Wave Conditions for Caisson Installation

Lin, Yu ; El Chahal, Ghassan ; Shao, Yanlin
part of: Proceedings of the 39th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2020), 2020
Presented at:
39th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

 

CFD-based Analysis of a 6MW Spar-type Floating Wind Turbine with Focus on Nonlinear Wave Loads

Yao, Tian-Cheng ; Zhao, Yong-Sheng ; He, Yan-Ping ; Shao, Yan-Lin ; Han, Zhao-Long ; Duan, Lei ; Huang, Chao
part of: Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering Conference, 2020
Presented at:
30th International Ocean and Polar Engineering Conference (ISOPE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

 

Combustion Characteristics, Performance and NOx Emissions of a Heavy-Duty Ethanol-Diesel Direct Injection Engine

Giramondi, Nicola ; Jäger, Anders ; Mahendar, Senthil Krishnan ; Erlandsson, Anders
in: S A E Technical Papers
Presented at:
Powertrains, Fuels & Lubricants Meeting 2020

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    År: 2020

  PDF

Comparing the Product Configuration Benefits in Engineering and Quotation Phases

Shafiee, Sara ; Savić, Marija ; Anišić, Zoran
part of: Proceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP-CE 2018), pages: 207-211, 2020
Presented at:
9th International Conference on Mass Customization and
Personalization - Community of Europe (MCP-CE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Complexity of Configurators Relative to Types of Outputs

Shafiee, Sara ; Schäffer , Eike ; Hvam, Lars
part of: Proceedings of the 22nd International Configuration Workshop, pages: 95-100, 2020
Presented at:
22nd International Configuration Workshop (CONFWS'20)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Defining the Requirements for a Tool to Support Circular Economy Business Model Innovation within Manufacturing Companies

Pieroni, M. P. P. ; McAloone, T. C. ; Pigosso, D. C. A.
part of: Proceedings of the Design Society: DESIGN Conference, pages: 2119-2128, 2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/ 10.1017/dsd.2020.28

 

Development of a Data Reduction Method for Composite Fracture Characterization Under Mode III Loadings

Sabbadin, Pietro ; Massabò, Roberta ; Berggreen, Christian
part of: Proceedings of XXIV AIMETA Conference 2019, pages: 660-670, 2020
Presented at:
24th Conference of the Italian Association of Theoretical and Applied Mechanics (AIMETA 2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/978-3-030-41057-5_54

 

Dynamic analysis of offshore wind turbine installation based on a novel integrated mating method

Chen, Mingsheng ; Wang, Fan ; Zhu, Ling ; Pedersen, Preben Terndrup
part of: Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering Conference, pages: 462-471, 2020
Presented at:
30th International Ocean and Polar Engineering Conference (ISOPE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

 

Effect of Damping on the Dynamic Responses of a Floating Bridge in Wind and Waves

Hong, Sunghun ; Cheng, Zhengshun ; Gao, Zhen ; Shao, Yanlin ; Xiang, Xu
part of: Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering Conference, pages: 2435-2446, 2020
Presented at:
30th International Ocean and Polar Engineering Conference (ISOPE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

 

Effect of polymer relaxation in automated micro polishing

Ben Achour, Soufian ; Zhu, Wule ; Bissacco, Giuliano ; Beaucamp, Anthony ; De Chiffre, Leonardo
in: AIP Conference Proceedings, vol: 2205, issue: 1

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1063/1.5142975

  PDF

Effect of progressive tool wear on the functional performance of micro milling process of injection molding tool

Davoudinejad, Ali ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: Procedia CIRP, vol: 87, pages: 159-163
Presented at:
5th CIRP Conference on Surface Integrity (CSI 2020)

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.procir.2020.02.031

 

Effects of Second-order Wave Force on Fatigue Damage Assessment of a TLP-type Floating Wind Turbine

Liu, Jia-Rong ; Zhao, Yong-Sheng ; He, Yan-Ping ; Shao, Yan-Lin ; Mao, Weng-Gang ; Han, Zhao-Long ; Gu, Xiao-Li ; Chao-Huang, _
part of: Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering Conference, pages: 415-422, 2020
Presented at:
30th International Ocean and Polar Engineering Conference (ISOPE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Energy integration and electrification opportunities in industrial laundries

Bühler, Fabian ; Müller Holm, Fridolin ; Zühlsdorf, Benjamin ; Elmegaard, Brian
part of: Proceedings of ECOS 2020: 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, 2020
Presented at:
33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

 

Estimation of Extreme Roll Motion Using the First Order Reliability Method

Choi, Ju-hyuck ; Jensen, Jørgen Juncher ; Nielsen, Ulrik Dam
part of: Proceedings of the 14th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2019), 2020
Presented at:
The 14th International Symposium on Practical Design of Ships and Other Floating Structures (PRADS 2019)

Type: Article in proceedings (Peer reviewed)

Status: Accepted/In press     |    År: 2020

  PDF

ETO Standardization Strategies: Verifying Implementation and Effect

Bertram, Christian Alexander ; Müller, Georg Otto ; Mortensen, Niels Henrik
part of: Proceedings of NordDesign 2020, 2020
Presented at:
NordDesign2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.35199/NORDDESIGN2020.13