Publications

You can also search directly in Orbit, DTU's research database.

Publikationer rss feed

2020
 

Analysis of lubricant performance in punching and blanking

Moghadam, M. ; Villa, M. ; Moreau, P. ; Dubois, A. ; Dubar, L. ; Nielsen, C. V. ; Bay, N.
in: Tribology International, vol: 141

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.triboint.2019.105949

 

Analysis of Transient Vibrations for Estimating Bolted Joint Tightness

Brøns, M. ; Thomsen, J. J. ; Sah, S. M. ; Tcherniak, D. ; Fidlin, A.
part of: Nonlinear Structures and Systems, pages: 21-24, 2020, Springer
Presented at:
37th Conference and Exposition on Structural Dynamics (IMAC 2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1007/978-3-030-12391-8_3

 

CFD investigations of breaking focused wave-induced loads on a monopile and the effect of breaker location

Aggarwal, Ankit ; Tomaselli, Pietro D. ; Christensen, Erik Damgaard ; Bihs, Hans
in: Journal of Offshore Mechanics and Arctic Engineering, vol: 142, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1115/1.4045187

 

Computational fluid dynamic modeling of liquid-gas flow patterns and hydraulics in the cross-corrugated channel of a plate heat exchanger

Zhu, Xiaowei ; Haglind, Fredrik
in: International Journal of Multiphase Flow, vol: 122

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2019.103163

 

Effect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel

Peng, Yawei ; Liu, Zhe ; Chen, Chaoming ; Gong, Jianming ; Somers, Marcel A. J.
in: Materials Science and Engineering A, vol: 769

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.msea.2019.138524

 

Effects of heat and pressure on hot-pressed geopolymer

Ranjbar, Navid ; Kashefi, Amin ; Ye, Guang ; Mehrali, Mehdi
in: Construction and Building Materials, vol: 231

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.conbuildmat.2019.117106

 

Full three dimensional cavitation instabilities using a non-quadratic anisotropic yield function

Legarth, Brian Nyvang ; Tvergaard, Viggo
in: Journal of Applied Mechanics, vol: 87, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1115/1.4044955

 

Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges

Guerra, M G ; Gregersen, Søren K. S. ; Frisvad, Jeppe Revall ; De Chiffre, Leonardo ; Lavecchia, F ; Galantucci, L M
in: Measurement Science and Technology, vol: 31, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1088/1361-6501/ab3edb

 

Multi-metal additive manufacturing process chain for optical quality mold generation

Biondani, F.G. ; Bissacco, G. ; Mohanty, S. ; Tang, P. T. ; Hansen, Hans Nørgaard
in: Journal of Materials Processing Technology, vol: 277

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.jmatprotec.2019.116451

 

Replication of micro-structured surfaces by integrating AM with PIM

Basso, Alberto ; Mendez Ribo, Macarena ; Christensen, Simon Emil ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
euspen's 20th International Conference & Exhibition

Type: Conference abstract for conference (Peer reviewed)

Status: Accepted/In press     |    Year: 2020

 

Scaling spray penetration at supersonic conditions through shockwave analysis

Salvador, Francisco Javier ; Morena, Joaquín De la ; Taghavifar, Hadi ; Nemati, Arash
in: Fuel, vol: 260

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.fuel.2019.116308

 

Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd

Luo, Xuan ; Feng, Zongqiang ; Yu, Tianbo ; Luo, Junqian ; Huang, Tianlin ; Wu, Guilin ; Hansen, Niels ; Huang, Xiaoxu
in: Acta Materialia, vol: 183, pages: 398-407

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.actamat.2019.11.034

2019
  PDF

Efficient sound radiation using a bandgap structure

Jung, Jaesoon ; Jeong, Cheol Ho ; Jensen, Jakob S.
in: Applied Physics Letters, vol: 115, issue: 4

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1063/1.5110296

 

Iterations as the result of social and technical factors: empirical evidence from a large-scale design project

Piccolo, Sebastiano A. ; Maier, Anja M. ; Lehmann, Sune ; McMahon, Chris A.
in: Research in Engineering Design, vol: 30, issue: 2, pages: 251-270

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s00163-018-0301-z

 

Development and metrological validation of a new automated scanner system for freeform measurements on wind turbine blades in the production

Lyngby, Rasmus Ahrenkiel ; Nielsen, Ewa ; De Chiffre, Leonardo ; Aanæs, Henrik ; Dahl, Anders Bjorholm
in: Precision Engineering, vol: 56, pages: 255-266

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.precisioneng.2018.12.006

 

Biomechanical, Structural and Performance Analysis of a Specific Type of Cardiac Assist Device Used in Left Ventricular Failures

Rahmani, Shahrokh ; Heidari, Alireza ; Saed, Behdad ; Mahpour, Adel ; Navidbakhsh, Mahdi ; Alizadeh, Mansour
in: Iranian Journal of Science and Technology - Transactions of Mechanical Engineering

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/s40997-019-00304-0

 

Finding Integral Distinguishers with Ease

Eskandari, Zahra ; Kidmose, Andreas Brasen ; Kölbl, Stefan ; Tiessen, Tyge
part of: Selected Areas in Cryptography – SAC 2018 , pages: 115-138, 2019, Springer
Presented at:
25th International Conference on Selected Areas in Cryptography, SAC 2018

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1007/978-3-030-10970-7_6

 

2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing

Dhar, S. ; Danielsen, Hilmar Kjartansson ; Fæster, Søren ; Rasmussen, Christian Jørgen ; Juul Jensen, Dorte
in: Wear, vol: 436-437

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.wear.2019.202959

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 71-74, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

3d Printed Mold for Powder Injection Molding Process

Basso, Alberto ; Mendez Ribo, Macarena ; Danielak, Anna Halina ; Yang, Bolong ; Kjeldsteen, Peter ; Valler, Peter ; Pedersen, David Bue ; Zhang, Yang
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

 

3D X-ray computerized tomography of White Etching Cracks (WEC)

Danielsen, H. K. ; Carrasco, A. J. ; Fæster, S. ; Dahl, K. V. ; Guzmán, F. Gutiérrez ; Sauvage, P. ; Jacobs, G.
in: Materials Characterization, vol: 150, pages: 78-87

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.matchar.2019.01.032

 

A 3D Approach for THD Lubrication in Tilting Pad Journal Bearing—Theory and Experiment

Bizarre, L. ; Andersen, T. B. ; Daniel, G. B. ; Santos, I. F. ; Cavalca, K. L.
in: Tribology Transactions

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    Year: 2019     |    DOI: https://doi.org/10.1080/10402004.2019.1664686

  PDF

A Characterization Study Relating Cross-Sectional Distribution of Fiber Volume Fraction and Permeability

Rasmussen, Filip S. ; Sonne, Mads R. ; Larsen, Martin ; Mikkelsen, Lars P. ; Hattel, Jesper H.
part of: Proceedings of 22nd International Conference on Composite Materials, 2019
Presented at:
22nd International Conference on Composite Materials 2019

Type: Article in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Achieving long-term modularization benefits: A small- and medium-sized enterprise study

Mortensen, Niels Henrik ; Bertram, Christian Alexander ; Lundgaard, Rasmus
in: Concurrent Engineering: Research and Applications, vol: 27, issue: 1, pages: 14-27

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1177/1063293X18803145


https://www.mek.dtu.dk/english/Research/Publications
11 DECEMBER 2019