Jon Spangenberg

Jon Spangenberg

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Manufacturing Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 224

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail josp@mek.dtu.dk
ORCID 0000-0002-5411-6821
Home page

Request a vCard via e-mail.

Publications
Projects
Activities
Courses
Loading

Publications rss feed

2020
2019
 

Analysing limitations of the FlowCyl as a one-point viscometer test for cement paste

Cepuritis, Rolands ; Skare, Elisabeth L. ; Ramenskiy, Evgeny ; Mørtsell, Ernst ; Smeplass, Sverre ; Li, Shizhao ; Jacobsen, Stefan ; Spangenberg, Jon
in: Construction and Building Materials, vol: 218, pages: 333-340

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.conbuildmat.2019.05.127

  PDF

Experimental analysis of the filament feeding force in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 141-145, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

FlowCyl: one-parameter cement paste rheology test developed at NTNU, Norway

Cepuritis, R. ; Skare, E. L. ; Jacobsen, S. ; Spangenberg, J. ; Smeplass, Sverre ; Mørtsell, E.
in: Rheologie, vol: 35, pages: 20-24

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019

 

Microproportioning paste with crushed aggregate filler by use of specific surface area

Skare, Elisabeth Leite ; Cepuritis, Rolands ; Spangenberg, Jon ; Ramenskiy, Evgeny ; Mørtsell, Ernst ; Smeplass, Sverre ; Jacobsen, Stefan
Presented at:
15th International Congress on the Chemistry of Cement

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Modelling of material deposition in big area additive manufacturing and 3D concrete printing

Comminal, Raphaël ; Serdeczny, Marcin Piotr ; Ranjbar, Navid ; Mehrali, Mehdi ; Pedersen, David Bue ; Stang, Henrik ; Spangenberg, Jon
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 151-154, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

 

Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 29

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.06.005

 

Numerical simulations of the mesostructure formation in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 28, pages: 419-429

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.05.024

 

Simulation of liquid composite moulding using a finite volume scheme and the level-set method

Sandberg, Michael ; Hattel, Jesper H. ; Spangenberg, Jon
in: International Journal of Multiphase Flow, vol: 118, pages: 183-192

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2019.06.014

  PDF

Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process

Sandberg, Michael ; Rasmussen, Filip S. ; Hattel, Jesper H. ; Spangenberg, Jon
in: AIP Conference Proceedings, vol: 2113, issue: 1

Type: Conference article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1063/1.5112527


https://www.mek.dtu.dk/english/research/publications/person?id=22925&tab=2&qt=dtupublicationquery
29 FEBRUARY 2020