Thomas Lundin Christiansen

Thomas Lundin Christiansen

Associate Professor

DTU MECHANICAL ENGINEERING
Department of Mechanical Engineering

Section of Materials and Surface Engineering

Technical University of Denmark

Produktionstorvet

Building 425, room 110

2800 Kgs. Lyngby

Ph.
Fax +45 45 25 19 61
E-mail tch@mek.dtu.dk
ORCID 0000-0001-7144-1557
Home page

Request a vCard via e-mail.

Publications
Projects
Courses
DTU news
Loading

Publications rss feed

2020
 

Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting

Valente, Emilie H. ; Jellesen, Morten S. ; Somers, Marcel A. J. ; Christiansen, Thomas L.
in: Surface and Coatings Technology, vol: 383

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2020     |    DOI: https://doi.org/10.1016/j.surfcoat.2019.125278

2019
 

Corrosion behaviour of Ni and nickel aluminide coatings exposed in a biomass fired power plant for two years

Wu, D. L. ; Dahl, K. V. ; Christiansen, T. L. ; Montgomery, M. ; Hald, J.
in: Surface and Coatings Technology, vol: 362, pages: 355-365

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.surfcoat.2018.12.129

 

High and Low Temperature Surface Hardening of Martensitic Stainless Steels

Tibollo, Chiara ; Villa, Matteo ; Christiansen, Thomas L. ; Somers, Marcel A. J.
Presented at:
ESSC & DUPLEX 2019

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

High Temperature Solution Nitriding of Stainless Steels; Current Status and Future Trends

Christiansen, Thomas L. ; Villa, Matteo ; Tibollo, Chiara ; Dahl, Kristian V. ; Somers, Marcel A. J.
Presented at:
European Conference on Heat Treatment 2019

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Influence of atmosphere on microstructure and nitrogen content in AISI 316L fabricated by laser‐based powder bed fusion

Valente, Emilie Hørdum ; Nadimpalli, Venkata Karthik ; Andersen, Sebastian Aagaard ; Pedersen, David Bue ; Christiansen, Thomas L. ; Somers, Marcel A. J.
part of: Proceedings of the 19th International Conference and Exhibition (EUSPEN 2019), pages: 244-247, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
euspen's 19th International Conference & Exhibition

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

New Developments in High Temperature Solution Nitriding of Stainless Steels

Christiansen, Thomas L. ; Villa, Matteo ; Tibollo, Chiara ; Dahl, Kristian V. ; Somers, Marcel A. J.
Presented at:
ESSC & DUPLEX 2019

Type: Paper (Peer reviewed)

Status: Published     |    Year: 2019

  PDF

Residual stress determination in oxidized bulk metallic glass using X-ray diffraction and FIB/DIC methods

Haratian, S. ; Niessen, F. ; Grumsen, F. B. ; Villa, M. ; Christiansen, T. L. ; Somers, M. A. J.
Presented at:
26th International Symposium on
Metastable, Amorphous and Nanostructured Materials (ISMANAM 2019)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    Year: 2019

 

Self-repair by stress-induced diffusion of noble elements during oxidation of Zr48Cu36Al8Ag8 bulk metallic glass

Haratian, Saber ; Grumsen, Flemming B. ; Villa, Matteo ; Christiansen, Thomas L. ; Somers, Marcel A.J.
in: Scripta Materialia, vol: 164, pages: 126-129

Type: Journal article (Peer reviewed)

Status: Published     |    Year: 2019     |    DOI: https://doi.org/10.1016/j.scriptamat.2019.01.045


https://www.mek.dtu.dk/english/research/publications/person?id=7205&tab=2&qt=dtupublicationquery
18 FEBRUARY 2020