Marcin Piotr Serdeczny

Marcin Piotr Serdeczny

Ph.d.-studerende

DTU MEKANIK
Institut for Mekanisk Teknologi

Sektion for Proces- og Produktionsteknologi

Danmarks Tekniske Universitet

Produktionstorvet

Bygning 425, rum 225B

2800 Kgs. Lyngby

Tlf.
Mobil
Fax 45 25 19 61
E-mail mpse@mek.dtu.dk
ORCID 0000-0003-1691-773X
Hjemmeside

Få tilsendt vCard på e-mail.

Publikationer
Projekter
Loading

Publikationer rss feed

2020
2019
  PDF

Experimental analysis of the filament feeding force in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 141-145, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

  PDF

Modelling of material deposition in big area additive manufacturing and 3D concrete printing

Comminal, Raphaël ; Serdeczny, Marcin Piotr ; Ranjbar, Navid ; Mehrali, Mehdi ; Pedersen, David Bue ; Stang, Henrik ; Spangenberg, Jon
part of: Proceedings of the Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing (2019), pages: 151-154, 2019, The European Society for Precision Engineering and Nanotechnology
Presented at:
Joint Special Interest Group meeting between euspen and ASPE Advancing Precision in Additive Manufacturing

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2019

 

Motion planning and numerical simulation of material deposition at corners in extrusion additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 29

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.06.005

 

Numerical simulations of the mesostructure formation in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 28, pages: 419-429

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2019     |    DOI: https://doi.org/10.1016/j.addma.2019.05.024

2018
 

Experimental validation of a numerical model for the strand shape in material extrusion additive manufacturing

Serdeczny, Marcin P. ; Comminal, Raphaël Benjamin ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 24, pages: 145-153

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.addma.2018.09.022

 

Measurements and simulations of the cross-section of the printed strands in fused filament fabrication

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, pages: 78-82, 2018, American Society for Precision Engineering
Presented at:
2018 ASPE and euspen Summer Topical Meeting

Type: Conference abstract in proceedings (Peer reviewed)

Status: Published     |    År: 2018

  PDF

Numerical Modeling of the Material Deposition and Contouring Precision in Fused Deposition Modeling

Comminal, R. ; Serdeczny, M. P. ; Pedersen, D. B. ; Spangenberg, J.
part of: Proceedings of the Annual International Solid Freeform Fabrication Symposium, pages: 1855-1864, 2018, Laboratory for Freeform Fabrication
Presented at:
29th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2018

  PDF

Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing

Comminal, Raphaël ; Serdeczny, Marcin P. ; Pedersen, David B. ; Spangenberg, Jon
in: Additive Manufacturing, vol: 20, pages: 68-76

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2018     |    DOI: https://doi.org/10.1016/j.addma.2017.12.013

  PDF

Numerical prediction of the porosity of parts fabricated with fused deposition modeling

Serdeczny, Marcin P. ; Comminal, Raphaël ; Pedersen, David B. ; Spangenberg, Jon
part of: Proceedings of the Annual International Solid Freeform Fabrication Symposium, pages: 1849-1854, 2018, Laboratory for Freeform Fabrication
Presented at:
29th Annual International Solid Freeform Fabrication Symposium (SFF Symp 2018)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2018