Publikationer

Du kan også lave en søgning direkte i Orbit, DTU's forskningsdatabase. 

Publikationer rss feed

2021
 

Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement

Zhang, Jingqi ; Liu, Yingang ; Bayat, Mohamad ; Tan, Qiyang ; Yin, Yu ; Fan, Zhiqi ; Liu, Shiyang ; Hattel, Jesper Henri ; Dargusch, Matthew ; Zhang, Ming-Xing
in: Scripta Materialia, vol: 191, pages: 155-160

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1016/j.scriptamat.2020.09.023

 

Condensation heat transfer and pressure drop characteristics of zeotropic mixtures of R134a/R245fa in plate heat exchangers

Zhang, Ji ; Elmegaard, Brian ; Haglind, Fredrik
in: International Journal of Heat and Mass Transfer, vol: 164

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.120577

 

Coupled longitudinal and transverse vibrations of tensioned Euler-Bernoulli beams with general linear boundary conditions

Sorokin, Vladislav S. ; Thomsen, Jon Juel ; Brøns, Marie
in: Mechanical Systems and Signal Processing, vol: 150

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1016/j.ymssp.2020.107244

 

Estimating bolt tension from vibrations: Transient features, nonlinearity, and signal processing

Brøns, Marie ; Thomsen, Jon Juel ; Sah, Si Mohamed ; Tcherniak, Dmitri ; Fidlin, Alexander
in: Mechanical Systems and Signal Processing, vol: 150

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1016/j.ymssp.2020.107224

 

Influence of geometrical alignment of the deformation microstructure on local migration of grain boundaries during recrystallization: A phase-field study

Yadav, Vishal ; Moelans, Nele ; Zhang, Yubin ; Juul Jensen, Dorte
in: Scripta Materialia, vol: 191, pages: 116-119

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1016/j.scriptamat.2020.09.028

 

In-Process Digital Monitoring of Additive Manufacturing: Proposed Machine Learning Approach and Potential Implications on Sustainability

Charles, Amal ; Salem, Mahmoud ; Moshiri, Mandaná ; Elkaseer, Ahmed ; Scholz, Steffen G.
part of: Sustainable Design and Manufacturing 2020, pages: 297-306, 2021, Singapore

Type: Book chapter (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1007/978-981-15-8131-1_27

 

On topology optimization of large deformation contact-aided shape morphing compliant mechanisms

Kumar, Prabhat ; Sauer, Roger A. ; Saxena, Anupam
in: Mechanism and Machine Theory, vol: 156

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1016/j.mechmachtheory.2020.104135

 

Vibration-Based Bolt Tension Estimation for Multi-bolt Joints

Brøns, M. ; Plaugmann, A. ; Thomsen, J. J. ; Fidlin, A.
part of: Nonlinear Structures & Systems, pages: 129-133 , 2021, Cham

Type: Book chapter (Peer reviewed)

Status: Published     |    År: 2021     |    DOI: https://doi.org/10.1007/978-3-030-47626-7_21

2020
 

3D-Printed Topology-Optimized Metaoptics

Roques-Carmes, Charles ; Lin, Zin ; Christiansen, Rasmus E. ; Salamin, Yannick ; Kooi, Steven E. ; Johnson, Steven G. ; Soljacic, Marin
Presented at:
2020 Conference on Lasers and Electro-Optics

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    År: 2020

 

3D Printing of Reservoir Devices for Oral Drug Delivery: From Concept to Functionality through Design Improvement for Enhanced Mucoadhesion

Vaut, Lukas ; Juszczyk, Julia J. ; Kamguyan, Khorshid ; Jensen, Kristian E. ; Tosello, Guido ; Boisen, Anja
in: A C S Biomaterials Science & Engineering, vol: 6, pages: 2478−2486

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1021/acsbiomaterials.9b01760

 

3D study of plastic flow localization at a void-sheet

Tvergaard, Viggo ; Legarth, Brian Nyvang
in: International Journal of Mechanical Sciences, vol: 173

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.ijmecsci.2020.105426

  PDF

A 1D "Navier-Stokes Machine" and its application to turbulence studies

Buchhave, Preben ; Velte, Clara M.
in: arXiv

Type: Journal article (Peer reviewed)

Status: Submitted     |    År: 2020

  PDF

A 3D Approach for THD Lubrication in Tilting Pad Journal Bearing—Theory and Experiment

Bizarre, L. ; Andersen, T. B. ; Daniel, G. B. ; Santos, I. F. ; Cavalca, K. L.
in: Tribology Transactions, vol: 63, issue: 1, pages: 120-132

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1080/10402004.2019.1664686

 

A Batch Blending System for Continuous Production of Multi-Component Fuel Blends for Engine Laboratory Tests

Larsson, Terra ; Erlandsson, Anders
in: S A E Technical Papers
Presented at:
Powertrains, Fuels & Lubricants Meeting 2020

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    År: 2020

 

A blind comparative study of focused wave interactions with floating structures

Ransley, Edward ; Yan, Shiqiang ; Brown, Scott ; Hann, Martyn ; Windt, Christian ; Schmitt, Pal ; Davidson, Josh ; Musiedlak, Pierre Henri ; Wang, Jinghua ; Wang, Junxian ; Ma, Qingwei ; Xie, Zhihua ; Zhang, Ningbo ; Zheng, Xing ; Giorgi, Giuseppe ; Chen, Hao ; Lin, Zaibin ; Qian, Ling ; Ma, Zhihua ; Bai, Wei ; Chen, Guo-Qiang ; Zang, Jun ; Ding, Haoyu ; Cheng, Lin ; Zheng, Jinhai ; Gu, Hanbin ; Gong, Xiwu ; Liu, Zhenghao ; Bingham, Harry B. ; Greaves, Deborah
in: International Journal of Offshore and Polar Engineering, vol: 30, issue: 1, pages: 1-10

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.17736/ijope.2020.jc774

 

Active Warping Control For Damping Of Torsional Beam Vibrations

Hoffmeyer, David ; Høgsberg, Jan
part of: Proceedings of the 9th Conference on Smart Structures and Materials SMART 2019, 2020
Presented at:
IX ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 2019)

Type: Article in proceedings (Peer reviewed)

Status: Accepted/In press     |    År: 2020

 

Additive manufacturing oriented topology optimization of structures with self-supported enclosed voids

Luo, Yunfeng ; Sigmund, Ole ; Li, Quhao ; Liu, Shutian
in: Computer Methods in Applied Mechanics and Engineering, vol: 372

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.cma.2020.113385

  PDF

A Design Specification Chain: A Concept for Improving Revision Management and Change Tracking

Bertram, Christian Alexander ; Rasmussen, Jeppe Bredahl ; Müller, Georg Otto ; Mortensen, Niels Henrik
part of: Proceedings of NordDesign 2020, 2020
Presented at:
NordDesign2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.35199/NORDDESIGN2020.61

  PDF

A Design Support Tool for Improving Maintenance Scheduling Process

Khalid, W. ; Soleymani, I. ; Sigsgaard, K. V. ; Hansen, K. B. ; Agergaard, J. K. ; Mortensen, N. H.
part of: Proceedings of the Design Society: DESIGN Conference, pages: 957-966, 2020
Presented at:
Design 2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1017/dsd.2020.126

  PDF

A detailed review on CO2 two-phase ejector flow modeling

Ringstad, Knut Emil ; Allouche, Yosr ; Gullo, Paride ; Ervik, Åsmund ; Banasiak, Krzysztof ; Hafner, Armin
in: Thermal Science and Engineering Progress

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1016/j.tsep.2020.100647

  PDF

A development approach towards user-centered front-ends for knowledge-based engineering configurators: a study within planning of robot-based automation solutions

Schäffer , Eike ; Shafiee, Sara ; Frühwald , Tobias ; Franke , Jörg
part of: Proceedings of the 22nd International Configuration Workshop, pages: 47-52, 2020
Presented at:
22nd International Configuration Workshop (CONFWS'20)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Advanced exergy analysis of heat pumps with different eco-friendly working fluids

Voloshchuk, Volodymyr ; Gullo, Paride ; Nekrashevych, Olena
Presented at:
6th International Conference on Contemporary Problems of Thermal Engineering

Type: Paper (Peer reviewed)

Status: Published     |    År: 2020

 

Advanced exergy-based performance enhancement of heat pump space heating system

Voloshchuk, Volodymyr ; Gullo, Paride ; Sereda, Volodymyr
in: Energy, vol: 205

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.energy.2020.117953

  PDF

Advances in Ultrasonic Welding of Thermoplastic Composites: A Review

Bhudolia, Somen K. ; Gohel, Goram ; Leong, Kah Fai ; Islam, Aminul
in: Materials, vol: 13, issue: 6

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.3390/ma13061284

  PDF

Aerodynamic Shape Optimization of Aircraft Wings Using Panel Methods

Conlan-Smith, Cian ; Ramos-García, Néstor ; Sigmund, Ole ; Andreasen, Casper Schousboe
in: AIAA Journal, vol: 58, issue: 9

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.2514/1.J058979

  PDF

A flexible and standalone forward simulation model for laboratory X‐ray diffraction contrast tomography

Fang, H. ; Juul Jensen, D. ; Zhang, Y.
in: Acta Crystallographica Section A: Foundations and Advances, vol: 76, issue: 6

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1107/S2053273320010852

 

A framework for topology optimization of inertial microfluidic particle manipulators

Andreasen, Casper Schousboe
in: Structural and Multidisciplinary Optimization, pages: 2481–2499

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/s00158-019-02483-5

 

A Functional Failure Analysis Method of Identifying and Mitigating Spurious System Emissions From a System of Interest in a System of Systems

Van Bossuyt, Douglas L. ; Arlitt, Ryan M.
in: Journal of Computing and Information Science in Engineering, vol: 20, issue: 5

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1115/1.4046991

  PDF

A mixed mode cohesive model for FRP laminates incorporating large scale bridging behaviour

Joki, R. K. ; Grytten, F. ; Hayman, B. ; Sørensen, B. F.
in: Engineering Fracture Mechanics, vol: 239

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.engfracmech.2020.107274

 

Analysis of lubricant performance in punching and blanking

Moghadam, M. ; Villa, M. ; Moreau, P. ; Dubois, A. ; Dubar, L. ; Nielsen, C. V. ; Bay, N.
in: Tribology International, vol: 141

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.triboint.2019.105949

  PDF

Analysis of the correlation between micro-mechanical fields and fatigue crack propagation path in nodular cast iron

Andriollo, Tito ; Zhang, Yubin ; Fæster, Søren ; Kouznetsova, Varvara
in: Acta Materialia, vol: 188, pages: 302-314

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.actamat.2020.02.026

  PDF

Analysis of the risk of galling in sheet metal stamping dies with drawbeads

Moghadam, Marcel ; Nielsen, Chris Valentin ; Bay, Niels
in: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1177/0954405420911307

 

Analysis of Transient Vibrations for Estimating Bolted Joint Tightness

Brøns, M. ; Thomsen, J. J. ; Sah, S. M. ; Tcherniak, D. ; Fidlin, A.
part of: Nonlinear Structures and Systems, pages: 21-24, 2020
Presented at:
37th Conference and Exposition on Structural Dynamics (IMAC 2019)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/978-3-030-12391-8_3

 

An application-oriented roadmap to select polymeric nanocomposites for advanced applications: A review

Doagou-Rad, Saeed ; Islam, Aminul ; Merca, Timea D.
in: Polymer Composites, vol: 41, issue: 4, pages: 1153-1189

Type: Review (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1002/pc.25461

 

A new generation 99 line Matlab code for compliance topology optimization and its extension to 3D

Ferrari, Federico ; Sigmund, Ole
in: Structural and Multidisciplinary Optimization

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1007/s00158-020-02629-w

  PDF

A New Rational Model for the Current-Induced Three Dimensional Scour Beneath Submerged Pipelines

Sui, Titi ; Staunstrup , Leon Heine ; Carstensen, Stefan ; Fuhrman, David R.
Presented at:
Virtual International Conference on Coastal Engineering (VICCE 2020)

Type: Conference abstract for conference (Peer reviewed)

Status: Published     |    År: 2020

 

A new σ‐transform based Fourier‐Legendre‐Galerkin model for nonlinear water waves

Klahn, Mathias ; Madsen, Per A. ; Fuhrman, David R.
in: International Journal for Numerical Methods in Fluids

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1002/fld.4881

 

An experimental and theoretical approach of a pinned and a conventional ball bearing for active magnetic bearings

Fonseca, Cesar Augusto ; Santos, Ilmar ; Weber, Hans I.
in: Mechanical Systems and Signal Processing, vol: 138

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.ymssp.2019.106541

 

An experimental investigation of the corrosive influence of SO 2 relative to H 2 SO 4 of marine engine cylinder liners

Kjemtrup, Lars ; Cordtz, Rasmus F. ; Jensen, Michael V. ; Schramm, Jesper
in: Lubrication Science, vol: 32, issue: 3, pages: 131-144

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1002/ls.1492

 

An improved analysis of a STB specimen for fracture characterization of laminates and foam-cored sandwich composites under mode III loads

Sabbadin, Pietro ; Massabó, R. ; Berggreen, C.
in: Engineering Fracture Mechanics, vol: 236

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.engfracmech.2020.107198

 

An innovative and eco-friendly modality for synthesis of highly fluorinated graphene by an acidic ionic liquid: Making of an efficacious vehicle for anti-cancer drug delivery

Jahanshahi, Mohammadjavad ; Kowsari, Elaheh ; Haddadi-Asl, Vahid ; Khoobi, Mehdi ; Bazri, Behrouz ; Aryafard, Meysam ; Lee, Jong Hyun ; Kadumudi, Firoz Babu ; Talebian, Sepehr ; Kamaly, Nazila ; Mehrali, Mehdi ; Dolatshahi-Pirouz, Alireza
in: Applied Surface Science, vol: 515

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.apsusc.2020.146071

 

Anisotropy effects on gaseous nitriding of austenitic stainless steel single crystals

Kücükyildiz, Ömer C. ; Grumsen, Flemming B. ; Christiansen, Thomas L. ; Winther, Grethe ; Somers, Marcel A.J.
in: Acta Materialia, vol: 194, pages: 168-177

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.actamat.2020.04.062

 

Annealing of Shot Peened Austenitic Superheater Tubes and Its Consequences for Steamside Oxidation

Pantleon, Karen ; Lampert, Felix ; Montgomery, Melanie
in: Metallography, Microstructure, and Analysis, vol: 9, pages: 603–614

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/s13632-020-00666-x

 

An online community-based dynamic customisation model: the trade-off between customer satisfaction and enterprise profit

Wang, Yu ; Wu, Jiacong ; Lin, Li ; Shafiee, Sara
in: International Journal of Production Research

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1080/00207543.2019.1693649

  PDF

A novel laser Doppler anemometer (LDA) for high-accuracy turbulence measurements

Yaacob, Mohd Rusdy Bin ; Schlander, Rasmus Korslund ; Buchhave, Preben ; Velte, Clara Marika
in: Experiments in Fluids

Type: Journal article (Peer reviewed)

Status: Submitted     |    År: 2020

 

A Numerical Investigation of Gap and Shape Effects on a 2D Plunger-Type Wave Maker

Nikseresht, Amir H. ; Bingham, Harry B.
in: Journal of Marine Science and Application, vol: 19, pages: 101-115

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/s11804-020-00135-5

 

A performance evaluation of the ejector refrigeration system based on thermo-economic criteria through multi-objective approach

Mansuriya, Kiran ; Patel, Vivek K. ; Desai, Nishith B. ; Vora, Nilesh M.
in: Clean Technologies and Environmental Policy

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1007/s10098-020-01884-1

 

A phase field model for elastic-gradient-plastic solids undergoing hydrogen embrittlement

Kristensen, Philip K. ; Niordson, Christian F. ; Martínez-Pañeda, Emilio
in: Journal of the Mechanics and Physics of Solids, vol: 143

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jmps.2020.104093

 

Application of design thinking to product-configuration projects

Shafiee, Sara ; Haug, Anders ; Shafiee Kristensen, Saeedeh ; Hvam, Lars
in: Journal of Manufacturing Technology Management

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1108/JMTM-04-2020-0137

  PDF

Application of Methanol with an Ignition Promotor in a Medium Speed CI engine

Cordtz, Rasmus F. ; Cheng, Chong ; Thomsen, Thomas B. ; Schramm, Jesper
Presented at:
Rostock Large Engine Symposium (RGMT 2020)

Type: Paper (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Approaches to analyzing multi-functional problems

Svendsen, Nicklas Werge ; Lenau, Torben Anker
part of: Proceedings of NordDesign 2020, 2020
Presented at:
NordDesign 2020

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.35199/NORDDESIGN2020.50

  PDF

A Review of Topology Optimisation for Fluid-Based Problems

Alexandersen, Joe ; Andreasen, Casper Schousboe
in: Fluids , vol: 5, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.3390/fluids5010029

  PDF

A review on current status of capacity control techniques for two-phase ejectors

Gullo, Paride ; Kærn, Martin Ryhl ; Haida, Michal ; Smolka, Jacek ; Elbel, Stefan
in: International Journal of Refrigeration

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1016/j.ijrefrig.2020.07.014

 

A simple characterization of H-convergence for a class of nonlocal problems

Bellido, José C. ; Evgrafov, Anton
in: Revista Matemática Complutense

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1007/s13163-020-00349-9

 

A simple model for nitrogen-induced lattice expansion of γ'N and γ N phases in Fe–Cr–Ni alloys with different chromium contents

Che, H. L. ; Lei, M. K. ; Somers, Marcel A. J.
in: Philosophical Magazine Letters

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1080/09500839.2020.1789234

 

A single parameter approach to enhance the microstructural and mechanical properties of beta Ti-Nb alloy via open-air fiber laser nitriding

Chan, Chi Wai ; Chang, Xianwen ; Bozorgzadeh, Mohammad Amin ; Smith, Graham C. ; Lee, Seunghwan
in: Surface and Coatings Technology, vol: 383

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.surfcoat.2019.125269

 

Assessment of the impact of inventory optimization drivers in a multi-echelon supply chain: Case of a toy manufacturer

Chinello, Elena ; Herbert-Hansen, Zaza Nadja Lee ; Khalid, Waqas
in: Computers & Industrial Engineering, vol: 141

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.cie.2019.106232

  PDF

A System Engineering Approach Using FMEA and Bayesian Network for Risk Analysis—A Case Study

Rastayesh, Sima ; Bahrebar, Sajjad ; Blaabjerg, Frede ; Zhou, Dao ; Wang, Huai ; Sørensen, John Dalsgaard
in: Sustainability, vol: 12, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.3390/su12010077

  PDF

A “User-Knowledge-Product” Co-Creation Cyberspace Model for Product Innovation

Wang, Yu ; Wu, Jiacong ; Zhang, Ru ; Shafiee, Sara ; Li, Cheng
in: Complexity, vol: 2020

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1155/2020/7190169

  PDF

Automotive battery pack manufacturing – a review of battery to tab joining

Zwicker, M.F.R. ; Moghadam, M. ; Zhang, W. ; Nielsen, C.V.
in: Journal of Advanced Joining Processes, vol: 1

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jajp.2020.100017

 

Barriers for virtual assessment of structural robustness

Nerenst, Tim Brix ; Ebro, Martin ; Nielsen, Morten ; Eifler, Tobias ; Nielsen, Kim Lau
part of: Conference Proceedings - International Mechanical Engineering Congress & Exposition, 2020
Presented at:
ASME 2019 International Mechanical Engineering Congress and Exposition

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1115/imece2019-11251

 

Benefit of speed reduction for ships in different weather conditions

Taskar, Bhushan ; Andersen, Poul
in: Transportation Research Part D: Transport and Environment, vol: 85

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.trd.2020.102337

 

Biomass gasification for bioenergy

Puig Arnavat, Maria ; Pape Thomsen, Tobias ; Sárossy, Zsuzsa ; Gadsbøll, Rasmus Østergaard ; Clausen, Lasse Røngaard ; Ahrenfeldt, Jesper
part of: Achieving carbonnegative bioenergy systems from plant materials, 2020

Type: Book chapter (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.19103/AS.2019.0027.04

 

Biomimetic Random Arrays of Nanopillars and Nanocones with Robust Antiwetting Characteristics

Li, Yupeng ; Li, Xiaoyu ; Liu, Xia ; Zhu, Bao ; Muzammil, Iqbal ; Lei, Mingkai ; Lakhtakia, Akhlesh
in: Journal of Physical Chemistry C, vol: 124, issue: 31, pages: 17095-17102

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1021/acs.jpcc.0c04804

  PDF

Blister Formation in Film Insert Moulding

Wöhner, Timo ; Islam, Aminul ; Hansen, Hans N. ; Tosello, Guido ; R. Whiteside, Ben
in: Micromachines, vol: 11

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.3390/mi11040424

 

Bragg gratings inscribed in solid-core microstructured single-mode polymer optical fiber drawn from a 3D-printed polycarbonate preform

Zubel, Michal G. ; Fasano, Andrea ; Woyessa, Getinet ; Min, Rui ; Leal-Junior, Arnaldo ; Theodosiou, Antreas ; Marques, Carlos A.F. ; Rasmussen, Henrik K. ; Bang, Ole ; Ortega, Beatriz ; Kalli, Kyriacos ; Frizera-Neto, Anselmo ; Pontes, Maria José ; Sugden, Kate
in: IEEE Sensors Journal

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1109/JSEN.2020.3003469

 

Breakdown mechanism of γ-Al2O3 on Ni2Al3 coatings exposed in a biomass fired power plant

Wu, D. L. ; Dahl, K. V. ; Grumsen, F. B. ; Christiansen, T. L. ; Montgomery, M. ; Hald, J.
in: Corrosion science, vol: 170

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.corsci.2020.108583

 

Building on Discovery: A Preview of 3DMS 2020

Juul Jensen, Dorte ; P. Miller, Matthew ; Zhang, Lei
in: JOM, vol: 72, issue: 3, pages: 985-986

Type: Comment/debate (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/s11837-020-04065-z

  PDF

Caisson Breakwater for LNG & Bulk Terminals: A Study on Limiting Wave Conditions for Caisson Installation

Lin, Yu ; El Chahal, Ghassan ; Shao, Yanlin
part of: Proceedings of the 39th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2020), 2020
Presented at:
39th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Calibration and Balancing of Multiple Tuned Mass Absorbers for Damping of Coupled Bending-Torsion Beam Vibrations

Hoffmeyer, David ; Høgsberg, Jan
in: Journal of Vibration and Acoustics, vol: 142, issue: 4

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1115/1.4046752

 

Carburization induced extra-long rolling contact fatigue life of high carbon bearing steel

Cao, Zhaoxi ; Liu, Tianqi ; Yu, Feng ; Cao, Wenquan ; Zhang, Xiaodan ; Weng, Yuqing
in: International Journal of Fatigue, vol: 131

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.ijfatigue.2019.105351

 

CFD-based Analysis of a 6MW Spar-type Floating Wind Turbine with Focus on Nonlinear Wave Loads

Yao, Tian-Cheng ; Zhao, Yong-Sheng ; He, Yan-Ping ; Shao, Yan-Lin ; Han, Zhao-Long ; Duan, Lei ; Huang, Chao
part of: Proceedings of the Thirtieth (2020) International Ocean and Polar Engineering Conference, 2020
Presented at:
30th International Ocean and Polar Engineering Conference (ISOPE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

CFD investigations of breaking focused wave-induced loads on a monopile and the effect of breaker location

Aggarwal, Ankit ; Tomaselli, Pietro D. ; Christensen, Erik Damgaard ; Bihs, Hans
in: Journal of Offshore Mechanics and Arctic Engineering, vol: 142, issue: 2

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1115/1.4045187

  PDF

CFD investigations of scour beneath a submarine pipeline with the effect of upward seepage

Li, Yuzhu ; Ong, Muk Chen ; Fuhrman, David R.
in: Coastal engineering, vol: 156

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.coastaleng.2019.103624

  PDF

CFD Simulation of Mixing and Segregation of Binary Solid Mixtures in a Dense Fluidized Bed

Anicic, Bozidar ; Lu, Bona ; Lin, Weigang ; Wu, Hao ; Dam-Johansen, Kim ; Wang, Wei
in: The Canadian Journal of Chemical Engineering, vol: 98, issue: 1, pages: 412-420

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1002/cjce.23561

 

Characterization, formation and development of scales on L80 steel tube resulting from seawater injection treatment

Yang, Yan ; Luo, Xuan ; Hong, Chuanshi ; Yadav, Abhijeet ; Rogowska, Magdalena ; Ambat, Rajan
in: Journal of Petroleum Science and Engineering, vol: 193

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1016/j.petrol.2020.107433

 

Characterization of channels made by laser powder bed fusion and binder jetting using X-ray CT and image analysis

Dahmen, T. ; Klingaa, C. G. ; Baier-Stegmaier, S. ; Lapina, A. ; Pedersen, D. B. ; Hattel, J. H.
in: Additive Manufacturing, vol: 36

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.addma.2020.101445

 

Characterization of near-zero pressure powder injection moulding with sacrificial mould by using fingerprint geometries

Zhang, Yang ; Basso, Alberto ; Christensen, Simon Emil ; Pedersen, David Bue ; Staal, Lasse ; Valler, Peter ; Hansen, Hans Nørgaard
in: CIRP annals

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1016/j.cirp.2020.04.052

  PDF

Circular business models: A review

Geissdoerfer, Martin ; Pieroni, Marina P.P. ; Pigosso, Daniela C. A. ; Soufani, Khaled
in: Journal of cleaner production

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jclepro.2020.123741

 

Circular Economy in the WEEE industry: a systematic literature review and a research agenda

Bressanelli, Gianmarco ; Saccani, Nicola ; Pigosso, Daniela C. A. ; Perona, Marco
in: Sustainable Production and Consumption, vol: 23, pages: 174-188

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.spc.2020.05.007

  PDF

Circular Product Design and Development: CIRCit Workbook 3

Shahbazi, S. ; Jönbrink, A. K. ; Jensen, T. Hjort ; Pigosso, D. C. A. ; McAloone, T. C.

Type: Book

Status: Published     |    År: 2020

  PDF

Closing the gap towards super-long suspension bridges using computational morphogenesis

Baandrup, Mads Jacob ; Sigmund, Ole ; Polk, Henrik ; Aage, Niels
in: Nature Communications, vol: 11, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1038/s41467-020-16599-6

  PDF

Closing the Loop for a Circular Economy: CIRCit Workbook 5

Hildenbrand, J. ; Shahbazi, S. ; Dahlström, J. ; Jensen, T. Hjort ; Pigosso, D. C. A. ; McAloone, T. C.

Type: Book

Status: Published     |    År: 2020

 

Coexistence of infinitely many large, stable, rapidly oscillating periodic solutions in time-delayed Duffing oscillators

Fiedler, Bernold ; Nieto, Alejandro López ; Rand, Richard H. ; Sah, Si Mohamed ; Schneider, Isabelle ; de Wolff, Babette
in: Journal of Differential Equations, vol: 268, issue: 10, pages: 5969-5995

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jde.2019.11.015

 

Cohesive traction–separation relations for tearing of ductile plates with randomly distributed void nucleation sites

Andersen, R. G. ; Tekoğlu, C. ; Nielsen, K. L.
in: International Journal of Fracture

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1007/s10704-020-00454-2

 

Combined provision of primary frequency regulation from Vehicle-to-Grid (V2G) capable electric vehicles and community-scale heat pump

Meesenburg, Wiebke ; Thingvad, Andreas ; Elmegaard, Brian ; Marinelli, Mattia
in: Sustainable Energy, Grids and Networks, vol: 23

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.segan.2020.100382

 

Combustion Characteristics, Performance and NOx Emissions of a Heavy-Duty Ethanol-Diesel Direct Injection Engine

Giramondi, Nicola ; Jäger, Anders ; Mahendar, Senthil Krishnan ; Erlandsson, Anders
in: S A E Technical Papers
Presented at:
Powertrains, Fuels & Lubricants Meeting 2020

Type: Conference article (Peer reviewed)

Status: Accepted/In press     |    År: 2020

  PDF

Comparing the Product Configuration Benefits in Engineering and Quotation Phases

Shafiee, Sara ; Savić, Marija ; Anišić, Zoran
part of: Proceedings of the 9th International Conference on Mass Customization and Personalization – Community of Europe (MCP-CE 2018), pages: 207-211, 2020
Presented at:
9th International Conference on Mass Customization and
Personalization - Community of Europe (MCP-CE 2020)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020

  PDF

Complexity of Configurators Relative to Types of Outputs

Shafiee, Sara ; Schäffer , Eike ; Hvam, Lars
part of: Proceedings of the 22nd International Configuration Workshop, pages: 95-100, 2020
Presented at:
22nd International Configuration Workshop (CONFWS'20)

Type: Article in proceedings (Peer reviewed)

Status: Published     |    År: 2020