Publikationer

Du kan også lave en søgning direkte i Orbit, DTU's forskningsdatabase. 

Publikationer rss feed

2020
 

Effect of low-temperature surface hardening by carburization on the fatigue behavior of AISI 316L austenitic stainless steel

Peng, Yawei ; Liu, Zhe ; Chen, Chaoming ; Gong, Jianming ; Somers, Marcel A. J.
in: Materials Science and Engineering A, vol: 769

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.msea.2019.138524

 

Effect of polymer relaxation in automated micro polishing

Ben Achour, Soufian ; Zhu, Wule ; Bissacco, Giuliano ; Beaucamp, Anthony ; De Chiffre, Leonardo
in: AIP Conference Proceedings, vol: 2205, issue: 1

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1063/1.5142975

 

Effect of superimposed compressive stresses on rolling contact fatigue initiation at hard and soft inclusions

Mahdavi, Hamidreza ; Poulios, Konstantinos ; Niordson, Christian F.
in: International Journal of Fatigue, vol: 134

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.ijfatigue.2019.105399

 

Effects of heat and pressure on hot-pressed geopolymer

Ranjbar, Navid ; Kashefi, Amin ; Ye, Guang ; Mehrali, Mehdi
in: Construction and Building Materials, vol: 231

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.conbuildmat.2019.117106

 

Fiber-reinforced geopolymer composites: A review

Ranjbar, Navid ; Zhang, Mingzhong
in: Cement and Concrete Composites, vol: 107

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.cemconcomp.2019.103498

  PDF

Full three dimensional cavitation instabilities using a non-quadratic anisotropic yield function

Legarth, Brian Nyvang ; Tvergaard, Viggo
in: Journal of Applied Mechanics, vol: 87, issue: 3

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1115/1.4044955

 

Gaseous surface hardening of Ti-6Al-4V fabricated by selective laser melting

Valente, Emilie H. ; Jellesen, Morten S. ; Somers, Marcel A. J. ; Christiansen, Thomas L.
in: Surface and Coatings Technology, vol: 383

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.surfcoat.2019.125278

 

Humidity Robustness of Plasma-Coated PCBs

Khangholi, Aliakbar ; Li, Feng ; Piotrowska, Kamila ; Loulidi, Samir ; Ambat, Rajan ; Van Assche, Guy ; Hubin, Annick ; De Graeve, Iris
in: Journal of Electronic Materials, vol: 49, issue: 1, pages: 848-860

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1007/s11664-019-07714-5

  PDF

Implications of lattice structures on economics and productivity of metal powder bed fusion

Flores, Iñigo ; Kretzschmar, Niklas ; Azman, Abdul Hadi ; Chekurov, Sergei ; Pedersen, David Bue ; Chaudhuri, Atanu
in: Additive Manufacturing, vol: 31

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.addma.2019.100947

 

Improving the efficiency of upconversion by light concentration using nanoparticle design

Madsen, S. P. ; Christiansen, J. ; Christiansen, Rasmus Ellebæk ; Vester-Petersen, J. ; Møller, S. H. ; Lakhotiya, H. ; Nazir, A. ; Eriksen, E. ; Roesgaard, S. ; Sigmund, Ole ; Lissau, J. S. ; Destouesse, E. ; Madsen, M. ; Julsgaard, B. ; Balling, P.
in: Journal of Physics D: Applied Physics, vol: 53, issue: 7

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1088/1361-6463/ab5553

 

Influences of micro-ridges orientation and position on the replication of micro-structured surfaces by injection molding

Regi, Francesco ; Basso, Alberto ; Kain, Martin ; Loaldi, Dario ; Li, Dongya ; Zhang, Yang ; Tosello, Guido
in: AIP Conference Proceedings, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1063/1.5142928

  PDF

Interactions of salivary mucins and saliva with food proteins: a review

Çelebioğlu, Hilal Yilmaz ; Lee, Seunghwan ; Chronakis, Ioannis S.
in: Critical Reviews in Food Science and Nutrition, vol: 60, issue: 1, pages: 64-83

Type: Review (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1080/10408398.2018.1512950

 

Isotropic “Quasi‐Fluid” Metamaterials Designed by Topology Optimization

Zhang, Huikai ; Kang, Zhan ; Wang, Yiqiang ; Wu, Wenjun
in: Advanced Theory and Simulations, vol: 3, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1002/adts.201900182

 

Measurement of polymers with 3D optical scanners: evaluation of the subsurface scattering effect through five miniature step gauges

Guerra, M G ; Gregersen, Søren K. S. ; Frisvad, Jeppe Revall ; De Chiffre, Leonardo ; Lavecchia, F ; Galantucci, L M
in: Measurement Science and Technology, vol: 31, issue: 1

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1088/1361-6501/ab3edb

 

Mechanical properties of additively manufactured die with numerical analysis in extrusion process

Davoudinejad, A. ; Bayat, M. ; Larsen, A. ; Pedersen, D. B. ; Hattel, J. H. ; Tosello, G.
in: A I P Conference Proceedings Series, vol: 2205, issue: 1
Presented at:
35th International Conference of the Polymer Processing Society (PPS-35)

Type: Conference article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1063/1.5142921

 

Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

Xu, C. L. ; Andriollo, T. ; Zhang, Y. B. ; Hernando, J. C. ; Hattel, J. ; Tiedje, N.
in: Scripta Materialia, vol: 178, pages: 463 - 467

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.scriptamat.2019.12.018

 

Microstructural characterization of eutectic and near-eutectic AlCoCrFeNi high-entropy alloys

Lozinko, Adrianna ; Zhang, Yubin ; Mishin, Oleg V. ; Klement, Uta ; Guo, Sheng
in: Journal of Alloys and Compounds, vol: 822

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jallcom.2019.153558

 

Multi-domain stability and modal analysis applied to Gas Foil Bearings: Three approaches

Osmanski, Sebastian von ; Larsen, Jon S. ; Santos, Ilmar F.
in: Journal of Sound and Vibration, vol: 472

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jsv.2020.115174

 

Multi-metal additive manufacturing process chain for optical quality mold generation

Biondani, F.G. ; Bissacco, G. ; Mohanty, S. ; Tang, P. T. ; Hansen, Hans Nørgaard
in: Journal of Materials Processing Technology, vol: 277

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jmatprotec.2019.116451

 

Multi-mode piezoelectric shunt damping with residual mode correction by evaluation of modal charge and voltage

Toftekær, Johan Frederik ; Høgsberg, Jan
in: Journal of Intelligent Material Systems and Structures

Type: Journal article (Peer reviewed)

Status: Accepted/In press     |    År: 2020     |    DOI: https://doi.org/10.1177/1045389x19891646

 

Non-equilibrium condensation of water vapour in supersonic flows with shock waves

Wen, Chuang ; Karvounis, Nikolas ; Walther, Jens Honore ; Ding, Hongbing ; Yang, Yan
in: International Journal of Heat and Mass Transfer, vol: 149

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.119109

 

Nonlinear compressive stability of hyperelastic 2D lattices at finite volume fractions

Bluhm, Gore Lukas ; Sigmund, Ole ; Wang, Fengwen ; Poulios, Konstantinos
in: Journal of the Mechanics and Physics of Solids, vol: 137

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020     |    DOI: https://doi.org/10.1016/j.jmps.2019.103851

 

Nonlinear Evolution of a Steep, Focusing Wave Group in Deep Water Simulated with OceanWave3D

Barratt, Dylan ; Bingham, Harry B. ; Adcock, Thomas A. A.
in: Journal of Offshore Mechanics and Arctic Engineering, vol: 142

Type: Journal article (Peer reviewed)

Status: Published     |    År: 2020